Bagged and bodied 99 c3500 build

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

618 Syndicate

You won't...
Supporting Member
Joined
Sep 17, 2020
Messages
6,747
Reaction score
15,863
Location
Southern Illinois
You need a vent on the diff. The hose gets it up a bit so if you back a boat into the lake you don't dribble water into the diff.
So it don't end up looking like this:
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

ROYALTYFORGE

I'm Awesome
Joined
Apr 8, 2023
Messages
324
Reaction score
938
Location
Iowa
Lower adjustable link bars are finished and got the tabs made for one side.
Once I get these done I will clean off the rest of the unnecessary things on the axle.
 

Attachments

  • 20230529_121750.jpg
    20230529_121750.jpg
    623.6 KB · Views: 21
  • 20230529_143750.jpg
    20230529_143750.jpg
    449.8 KB · Views: 21
  • 20230529_143741.jpg
    20230529_143741.jpg
    558 KB · Views: 21

ROYALTYFORGE

I'm Awesome
Joined
Apr 8, 2023
Messages
324
Reaction score
938
Location
Iowa
Not a whole lot of noticeable progress, but got the new raised gas tank crossmember in. I also got the layout for the wishbone figured out.

When setting up all of the links no matter the configuration, do you do it all at estimated ride height or half travel, or something else? Right now I have it sitting so the axle is just poking through where the bottom of the frame would have been.

Also, do you need all of your links to land centered on the axle?
 

Attachments

  • 20230604_134434.jpg
    20230604_134434.jpg
    546.5 KB · Views: 18
Top