Man that sucks! Gotta be careful!I tweaked my back lowering it.
I’ve got a nerve in my back that will pinch when I’m working too hard, makes me collapse it’s so painful.
No Power Grey Wire to Fuel Pump
- Thread starter Caman96
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I’ve got a nerve in my back that will pinch when I’m working too hard, makes me collapse it’s so painful.
Yeah, you’ve got a nerve!!!
…i got that too
HOW did you "lower it"?
I use hydraulics. Run a bolt though the chain to secure it to the hook. Custom-cut 2X4 prevents the bed from bending inward.
You must be registered for see images attach
So I had 4 milk cartons set at 4”x4”.
2x4x4’ on edge screwed into 1x5” making a strongback- 2 of these made up sitting on milk cartons directly behind truck. Also fastened to cartons so they wouldn’t tip over. 4 people picked up bed and walked straight back and set it down. I was on front of cab and when lowering it tweaked my back. Because it sits low, using knee and not back didn’t work out too good. I’m fine. Maybe I’ll do like you did, but have my buddy bring his wrecker and pick it up and lower with winch.
Power washed, wire wheeled and Klean Strip Metal Prep sprayed on and soaking for the night. Question- Can Por-15 be intermingled with
After I wire wheeled, it looked more uniform than what it looks like with metal prep sprayed on. Stuff makes it look weird.
Rust-Oleum 344763?
You must be registered for see images attach
After I wire wheeled, it looked more uniform than what it looks like with metal prep sprayed on. Stuff makes it look weird.
Last edited:
evilunclegrimace
Does not always play well with others
Yes
Sender/Pump installed. Instantly fired right up. Painting frame right now with Por-15. After Klean Strip Metal Prep, it says to paint within 48 hours. That stuff really works.
You must be registered for see images attach
You must be registered for see images attach
GM 15963584 Filler Neck Vent Tube has 4 holes, but mostly intact.
They actually sell these on Summit, but they are about a month to ship. So I got some 5/8” I.D. fuel line hose, thin film of grease on tube, heated hose with heat gun and it went on. Not that easy, but it’s on and will not need clamps, it’s TIGHT! Obviously, for rest of its connections, will get clamps.
You must be registered for see images attach
They actually sell these on Summit, but they are about a month to ship. So I got some 5/8” I.D. fuel line hose, thin film of grease on tube, heated hose with heat gun and it went on. Not that easy, but it’s on and will not need clamps, it’s TIGHT! Obviously, for rest of its connections, will get clamps.
You must be registered for see images attach
You must be registered for see images attach
Similar threads
Members online
- DesertRat828
- 13_jdb
- k00laid83
- Road Trip
- LTC_
- Tommy1234
- 99xcss4
- Jlojub
- Wh4t3v3rs
- Scooterwrench
- scott2093
- vince72
- SNCTMPL
- 0xDEADBEEF
- hskrnut
- Oldhondaguy
- Caman96
- K3V0
- 1014Barnes
- fancyTBI
- snowboardfan03
- scottrivenburg101
- Fireball5657
- Stumpy
- Keeper
- Schurkey
- Remodelmaster
- L31MaxExpress
- BMarino
- Irishnexus
- supspt454
- goldoro
- Aidan Kesler
- JerryG90
- BeXtreme
- rhammond
- M5847
- 454cid
- alabbar
- 90gmcsierraL59
- Alteca
- Kyle_Fincher
- Supercharged111
- Crumbk20
- caw_86
- Dropped88
- BigReb95
- Mattcourt21
- Striker1423
- benbean70