1967 Dodge D100

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

0xDEADBEEF

Supporting Member
Supporting Member
Joined
May 3, 2021
Messages
2,477
Reaction score
6,098
Location
127.0.0.1
It needs one of these

I would love to have one. Unfortunately, they aren't giving them away. I will say if I ever am in the position to spend big money on a replacement engine for Dodgey, I might as well swap it back to Mopar.

This truck could have been optioned with a 383 big block, I wouldn't have scrapped that.
 

0xDEADBEEF

Supporting Member
Supporting Member
Joined
May 3, 2021
Messages
2,477
Reaction score
6,098
Location
127.0.0.1
Holley has a bunch of stuff on clearance. Just scored an aluminum 3 row big block Mopar radiator for $140. Most importantly it has a passenger side inlet so I can get rid of the upper hose looptyloop finally. I was thinking about cutting the inlet off and re-attaching, but for $140 I'll just swap the rad.

I also picked up a side opening lid for the hi-ram. I don't like how my intake pipes get in the way of the radiator. I had to offset the fan to the bottom half of the radiator because of that. I could actually route the pipe through the fender and gain a bunch of that room back. The throttle cable would become interesting then. Not in a big hurry to change it up, and I may not, but the lid was also cheap.
 
Top