Ok, I'll bite. If I decided to change to top post here's the plan. 1) cut off the two side attachments. 2) trim back insulation, clean no cancer. 3) obtain new clamp ends, with hole in end for wire 4) decide silver solder or use big 00, 000, squeeze pliers, shrink tube on first. 5) attach new ends,slide down shrink, toast and done.
I used these silver pellets, drop it in hole heat to melting with butane, stick wire in done. Or if you have really big crimp pliers. For certified installation, witness hole visual and two crimps. Clean and easy.
Good luck.