12200411 PCM swap for 1996 to 2000 GMT400 trucks

project97obs · Nov 13, 2022

Anyone have the pinout sheet? i have tried to contact LexTech with no success. oddly when i go to gmtruckcentral.com in any browser or device it tries to have me download a file??? i have an 0411, just need the pinouts/instructions.

Awest623 · Nov 14, 2022

Spareparts said:
With the 0411 ecu im wondering if there is a way to have Torque read the oil pressure.
Torque does come up with two options but neither will work with the current sensor on the block.
Would a 5.3ls sender work if i can find one that will plug in?

The oil pressure sensor on these trucks goes to the gauges and the gauges only. Not possible to read it through torque.

If you want to display it separate of the dash in the cab you'll have to buy an aftermarket oil pressure gauge and tap it into the sender location with a t fitting.

Spareparts · Nov 16, 2022

I have read that it does not go through the ecu but Torque will read things that go to the cluster but you need to use a command? like 12 or 15 or 3 for the PID and then figure out the rest of what is needed. I also read something about using AZT for oil pressure.

Spareparts · Nov 16, 2022

Another question.
My suburban came with remote door locks but no fobs. Can i still get the regular fobs and program them as usual or do i need to get them for a 2005 express van?

Awest623 · Nov 17, 2022

Spareparts said:
Another question.
My suburban came with remote door locks but no fobs. Can i still get the regular fobs and program them as usual or do i need to get them for a 2005 express van?

Regular key fob. The keyless system is entirely separate from the ecu. Boost auto parts makes some nice looking ones

Mitchg · Nov 29, 2022

monstar_est87 said:
411 pcm swap and CA smog

Hey guys... Im reposting here and there im hopes I can get an answer here, & hopefully help sum1 else out...

Has any1 had any issue passing smog tests in CA after the 411 swap..? I heard that it will not pass because the pcm will read as a 02 chevy express van... And I think just on looks... That in CA u can not swap pcms... I mean sure I could just swap my old black box in but c'mon re-pinning once is hard enough im not trying to do this every time im going to smog... so looking 2 hear back from u guys especially u Californians...

Hi, I live in Los Ángeles, I want to do the 411 swap, where you able to get your truck to pass smog?

Supercharged111 · Nov 29, 2022

Mitchg said:
Hi, I live in Los Ángeles, I want to do the 411 swap, where you able to get your truck to pass smog?

If you register it in another state, yes. It's not going to come up as a GMT400 when the ref plugs into it.

BeXtreme · Nov 30, 2022

Supercharged111 said:
If you register it in another state, yes. It's not going to come up as a GMT400 when the ref plugs into it.

Really? I would think it would be just fine if you copied the VIN and other pertinent data over.

Supercharged111 · Nov 30, 2022

BeXtreme said:
Really? I would think it would be just fine if you copied the VIN and other pertinent data over.

Ya know what, this sounds like a good science experiment for me. Let me try to flash my VIN into my 1500 tonight and see if a generic scan tool doesn't just use that alone to decide what platform the vehicle is and report back. If I forget, feel free to ping me.

Spareparts · Nov 30, 2022

My 0411 has my 1998 vin and comes up as a 1998 Chevy

12200411 PCM swap for 1996 to 2000 GMT400 trucks

project97obs

Newbie

Awest623

A juicy girl got me, again

Spareparts

Supporting Member

Spareparts

Supporting Member

Awest623

A juicy girl got me, again

Mitchg

Newbie

Supercharged111

Truly Awesome

BeXtreme

I'm Awesome

Supercharged111

Truly Awesome

Spareparts

Supporting Member

Similar threads

Latest posts

Members online

Forum statistics

Share this page