Project Farm did a test with tools like these and had one very close if not the same. Miserable fail
Good vid on 8 lug hub replacement.
- Thread starter Spareparts
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Just saw that, similar, but was a China made tool. I was reading about them on a tool forum. Bunch of reviews, I’d say about 2/3’s were positive. Some guys said junk other’s using with large breaker bars and having success.
I wanted clearance to the outer CV joint/boot/clamp.
OK I have to say it. Hitting a hammer with another hammer might not be the best idea. That's a great way to send splintered steel flying. Just screw the lug nut back on flush to the stud and hit it. The nut will protect the threads.
Got both my hubs changed today. Had to pound a 9 1/6 on one bolt but the rest came without a fight. Front end is a lot quieter now and for the first time since i got this truck last October (2021) the ABS light is off and now working!
Similar threads
Staff online
-
df2x44L60E Destroyer -
kennythewelderOfficially Retired, B31-3 (6-G) certified welder.
Members online
- jus10inbrla
- Z71Hobbs
- L31MaxExpress
- torhne
- hunterkeslar89
- orange57
- Feedfc
- Harry_Pollack
- VIKING_MECHANIC
- Shwa Kid
- MartilloTejano69
- squirrels2k
- Anchor
- shablagoo_gabagool
- TruckinAnissa707
- KenHorn
- Komet
- pgp66
- KendallConnor
- SNCTMPL
- jacknewt
- Hipster
- BNielsen
- Ekays
- Curtis21
- Posobs96
- Aidan Kesler
- rhammond
- Caman96
- HotWheelsBurban
- Marine1979
- Morales-teodoro
- Das Hatt
- 1996bluegreychevy
- 454cid
- chrismeyer78
- tayto
- df2x4
- Drunkcanuk
- 97C1500TJ
- 96OneTon
- movietvet
- jimdaug
- Supercharged111
- strikk
- KagamineFan
- yevgenievich
- kennythewelder
- scott2093
- JPVortex