DonYukon
Dont stop until it sounds expensive
are you talking about these? They are super hard to find…especially without broken tabs
That and the whole bezel that goes around the door handle.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
are you talking about these? They are super hard to find…especially without broken tabs
The whole bezel that goes around these is the same as what comes off of the suburbans, which I don’t think are as hard to find as the two window switch bezels.That and the whole bezel that goes around the door handle.
Maybe its a area thing I did find a red set but wanted a grey set and havent scored it yetThe whole bezel that goes around these is the same as what comes off of the suburbans, which I don’t think are as hard to find as the two window switch bezels.
That's bad news. I wonder if it has to do with supply chain issues coming from the PRC. Thanks for the leg work on that, I hope it helps people out.Finally heard back from classicparts.com
They no longer have the upper and lower tilt steering column shrouds for sale and do not plan to have them again. So if anyone were to make them it would be very tempting buy.
I also found PN for more color options. I'm put them here in the hopes that the almighty algorithm will help others trying to find these parts.
Upper Mold: CHT #26076232 C-2
26036499 - Graphite
26076123 - Shale
26075445 - Ebony
Lower Mold: CHT #26076231 C-3
26036498 - Graphite
26076122 - Shale
26075446 - Ebony
I agree with the cup holder block offReally cool stuff you’re coming out with. I’ve had the idea of a blank block off for the utterly useless under vent dash mounted cup holders in the 95+ dash. Something that same shape without the finger hole. Then I had the idea of having different mount options for the front like a GoPro mount or socket for the ball and socket RAM mounts etc…You must be registered for see images attach
Also thought about the tweeter grilles in the door panels, something with a molded in tweeter mount that could be drilled out for aftermarket tweeters for folks that hate using fiberglass or just don’t have the means for a full custom mounting solution…
You must be registered for see images attach
Just some ideas I’ve had
I'll see if I can find some to pull measurements off of, don't have any handy yet but I can take a look!Really cool stuff you’re coming out with. I’ve had the idea of a blank block off for the utterly useless under vent dash mounted cup holders in the 95+ dash. Something that same shape without the finger hole. Then I had the idea of having different mount options for the front like a GoPro mount or socket for the ball and socket RAM mounts etc…
Also thought about the tweeter grilles in the door panels, something with a molded in tweeter mount that could be drilled out for aftermarket tweeters for folks that hate using fiberglass or just don’t have the means for a full custom mounting solution…
Just some ideas I’ve had
The whole handle or the small plastic screw covers only?How about the plastic pieces for pull and oh **** handles for 88 & 89
Just the plastic piecesI'll see if I can find some to pull measurements off of, don't have any handy yet but I can take a look!
The whole handle or the small plastic screw covers only?