Bagged manifold inside cab

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

618 Syndicate

You won't...
Supporting Member
Joined
Sep 17, 2020
Messages
6,601
Reaction score
15,454
Location
Southern Illinois
Is your interior buckets? I drilled a hole through the floor under the center console for the gauge lines, grommets keep water and grime out.

I don't have anything lifted currently, but we have similar interests, see my sig.
 

Low-lah98

Newbie
Joined
Jun 28, 2021
Messages
12
Reaction score
22
Location
Portland, or
No I’m still rocking the bench seat. I put black carpet in the interior and its black inside now. I will be looking under the truck today for a good spot to push everything through.

You’ll have to post some pics up!
 

618 Syndicate

You won't...
Supporting Member
Joined
Sep 17, 2020
Messages
6,601
Reaction score
15,454
Location
Southern Illinois
No I’m still rocking the bench seat. I put black carpet in the interior and its black inside now. I will be looking under the truck today for a good spot to push everything through.

You’ll have to post some pics up!
Besides the gauges in the console, my interior is stock, but I'll be doing some minor upgrades this spring. I'll post pictures as I do it.
Here's a link to the build thread.
 

Low-lah98

Newbie
Joined
Jun 28, 2021
Messages
12
Reaction score
22
Location
Portland, or
Just wanted to post an update so it’s not a ghosted thread. I ended up pulling the carpet back and popping one of the body plugs out. The shoving a piece of coolant hose through the hole, then feeding the airlines through the hose. It works and doesn’t interfere with the bench seat and is actually quite hidden. Here are some pics of the hole.
You must be registered for see images attach
 

Attachments

  • E5F3C407-6BEC-41D0-904A-474965D57B3D.jpeg
    E5F3C407-6BEC-41D0-904A-474965D57B3D.jpeg
    254.4 KB · Views: 9
  • 29CBF124-40A0-4A65-9CEF-57416668B3AF.jpeg
    29CBF124-40A0-4A65-9CEF-57416668B3AF.jpeg
    357 KB · Views: 10

Nad_Yvalhosert

I'm Awesome
Joined
Oct 11, 2016
Messages
1,666
Reaction score
2,085
Location
Rochester, NY
Post 8, the last pic: the one that shows the caliper from the inside.
How much fun did you have bleeding the brakes with the bleeder on the bottom?
I'm pretty sure air rises to the top.

Edit: I looked closer, and this time with a magnifying glass. The bleeder IS on top, it's the banjo bolt that I saw on the tiny screen on my phone.
Good looking four wheel disc swap!
 
Last edited:

Low-lah98

Newbie
Joined
Jun 28, 2021
Messages
12
Reaction score
22
Location
Portland, or
You must be registered for see images attach
You must be registered for see images attach

Yep still got it. It’s so close to laying out in the front but i just settle for where it was so i could drive it and go to meets this summer. Now it’s awaiting an LS swap.

And once i got the axle under my truck i Reclocked the calipers so now everything is good and bled fine
 
Top