Wildblue19
I'm Awesome
Thread started to offer a concise, updated list of all the parts offered for GMT400 trucks found here at Reversion Raceworks. Custom requests, and more info about the parts can be found at the end of the thread. All parts can be customized to fit your build, just reach out.
95-98+
- EFI Dash mount for several screens, including the Holley 12.3" ProDash with no modification required. Also for the Holley 6.86, 7", Tinker 7", and Haltech IC7 as well as a blank option.
- Driver's side vent gauge pod, for a 2 1/16" gauge.
88-94
- EFI Dash mount for the Holley 6.86" ProDash and 7", as well as the Haltech IC7 and a blank option. It's a flat ABS panel that uses the OE shroud to keep fit and finish factory and price low.
- Radio Replacement Panel - mounts the same as the factory radio and is a clean option for those not looking for the 'pocket' style fillers commonly seen.
- Aftermarket Radio 'Pocket' Filler panel - if you already have one of the aftermarket delete pockets these will fill in the middle.
- Driver's side AC vent gauge pod - fits a 1 1/16" gauge in the factory vent location with no modifications
- Fuse panel cover with reinforced tabs and provisions to hold extra fuses on the back
88-98 (*exceptions)
- ABS or Aluminum door vent panels with several designs from OE style to logo cutouts.
- Ashtray to round USB Adapter *Not for 95-98 rear door handle ash trays - only for the larger 'square' ash trays as pictured on site, usually in extended cabs and Burbs/Tahoes.
- Overhead console gauge / switch panel - for those that installed an overhead console in their pickups to replace the unused rear air controls.
Background: I work with the RR team as their go-to guy for expanding GMT400 parts. I've owned and driven these trucks as daily drivers for many years and am constantly learning more about them and sharing my projects on GMT400.com. I have a different thread here that has been great to chat with the community for requests and progress updates on the projects that I work on in our community. You can also get into our direct email via the contact form on the RR site if you would like your request kept confidential.
Please know these parts are small batch, 100% US made, with American source raw materials. We aren't Amazon, and our prices and lead times reflect that. Our parts take time to design, manufacture, QC, and package. What we offer instead that the big stores cannot is support when you need it, where you can talk to us on the phone without a maze of options, affordable one-off custom work, and years of technical engineering and manufacturing experience coupled with the 'real world' aspect of being car builders and racers.
Thanks for looking!
You must be registered for see images attach
95-98+
- EFI Dash mount for several screens, including the Holley 12.3" ProDash with no modification required. Also for the Holley 6.86, 7", Tinker 7", and Haltech IC7 as well as a blank option.
- Driver's side vent gauge pod, for a 2 1/16" gauge.
88-94
- EFI Dash mount for the Holley 6.86" ProDash and 7", as well as the Haltech IC7 and a blank option. It's a flat ABS panel that uses the OE shroud to keep fit and finish factory and price low.
- Radio Replacement Panel - mounts the same as the factory radio and is a clean option for those not looking for the 'pocket' style fillers commonly seen.
- Aftermarket Radio 'Pocket' Filler panel - if you already have one of the aftermarket delete pockets these will fill in the middle.
- Driver's side AC vent gauge pod - fits a 1 1/16" gauge in the factory vent location with no modifications
- Fuse panel cover with reinforced tabs and provisions to hold extra fuses on the back
88-98 (*exceptions)
- ABS or Aluminum door vent panels with several designs from OE style to logo cutouts.
- Ashtray to round USB Adapter *Not for 95-98 rear door handle ash trays - only for the larger 'square' ash trays as pictured on site, usually in extended cabs and Burbs/Tahoes.
- Overhead console gauge / switch panel - for those that installed an overhead console in their pickups to replace the unused rear air controls.
Background: I work with the RR team as their go-to guy for expanding GMT400 parts. I've owned and driven these trucks as daily drivers for many years and am constantly learning more about them and sharing my projects on GMT400.com. I have a different thread here that has been great to chat with the community for requests and progress updates on the projects that I work on in our community. You can also get into our direct email via the contact form on the RR site if you would like your request kept confidential.
Please know these parts are small batch, 100% US made, with American source raw materials. We aren't Amazon, and our prices and lead times reflect that. Our parts take time to design, manufacture, QC, and package. What we offer instead that the big stores cannot is support when you need it, where you can talk to us on the phone without a maze of options, affordable one-off custom work, and years of technical engineering and manufacturing experience coupled with the 'real world' aspect of being car builders and racers.
Thanks for looking!
