Moparmat2000
I'm Awesome
Speaking of "the white buffalo" my friend 2G Gary tapped me to build the gage panel for it. It's been some time since I started this thread, I may have put these pix here, may not have, but he wanted gages that were better than stock. Autometer Z series, and a Matt fab and install. We started with a stock stripped empty S-10 gage bucket. I milled down any high spots and bonded a piece of sanded down .050" thick aluminum sheet with JB weld. Then cut out for the gages, and Harley Davidson indicator lights with universal symbols made by SoliCo.
I have a bare stock plastic gage bucket for my silverado and am thinking pretty hard on doing this. What's holding me up is cutting the wiring coming in to wire it up. I did that on my buddies truck and then pinned everything with molex connectors. I really dont want to cut the stock plugs. Heres his gage panel I made and installed. Some ideas for you guys.
I have a bare stock plastic gage bucket for my silverado and am thinking pretty hard on doing this. What's holding me up is cutting the wiring coming in to wire it up. I did that on my buddies truck and then pinned everything with molex connectors. I really dont want to cut the stock plugs. Heres his gage panel I made and installed. Some ideas for you guys.
Attachments
Last edited: