MIHELA
1-5-6-3-4-2-7-8
It's actually just a standalone harness that runs between the back of the radio and the slave unit. There's a connector separate from the main connector on the radio just for it.
'96 1500 external/slave factory CD player: my experience w/repair...almost a joke...
- Thread starter DennisT
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
AK49BWL
GMT400 Forever!
And it's usually not there if you didn't have a slave unit already installed from the factory. They're easy enough to remove from a junkyard truck if you can find one that hasn't been cut. They're also in the S-Series trucks 98-05 that have the slave unit (tape usually) in the floor console, or in 99-02 GMT800s with the same.
HotWheelsBurban
Gotta have 4 doors..... Rawhide, TOTY 2023!
Thanks guys, I will look for that when I get to the yard again.
DennisT
I'm Awesome
AK49, thanks. I have figured that, "jumper cable," to the remote CD was all by itself, but I've tried to pull two or three out and all seemed, "trapped," inside the dash. Am I missing something to their removal?
someotherguy
Truly Awesome
Can't recall but I think it's partially just jammed in there trapped between plastic bits, but there may also be one retainer taped onto the bundle - if you pull the radio and A/C controls out, look for the nipple of a plastic retainer poking through the dash shell facing you, and push it out while wiggling on the harness.
Richard
Similar threads
