97 SAS Suburban

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

CumminsBronco

OBS Enthusiast
Joined
Nov 28, 2021
Messages
87
Reaction score
96
Location
southern indiana
ORD brackets arrived, still waiting for more parts. Seems like everything is on back order that I need.
Looking good Mully! What tires are those? I'm building a similar 97 Sub, but with a 5.9 Cummins. Trying to run 37's but might have to drop down to 35's as I don't want to have to trim too much on frt fenders.
I'm also running a SuperDuty 60 on leafs. What springs are you going to run up fro t? Another 97 Sub I did I used 47'' one ton Chevy springs. This time around I've gone with 2003 SuperDuty springs.
Again, good looking ride!
 

Mully

Newbie
Joined
May 15, 2022
Messages
26
Reaction score
66
Location
Ca
Looking good Mully! What tires are those? I'm building a similar 97 Sub, but with a 5.9 Cummins. Trying to run 37's but might have to drop down to 35's as I don't want to have to trim too much on frt fenders.
I'm also running a SuperDuty 60 on leafs. What springs are you going to run up fro t? Another 97 Sub I did I used 47'' one ton Chevy springs. This time around I've gone with 2003 SuperDuty springs.
Again, good looking ride!
Tires are from simple tire, Comforser CF3000, 33x12.50x17. Going to step up to 35s after the front axle is installed and everything is done. Running Skyjacker springs. I would love to have a Cummins motor, but I think that's beyond my budget and abilities. I do my builds real slow, and on a budget, but the end results are always worth it. Thanks for your interests.
 

Hamps

I'm Awesome
Joined
Jan 17, 2019
Messages
186
Reaction score
266
Location
Dallas Ish
Nature of the beast currently man. Supply chain is suffering and I’m sure most are just waiting on material.
Good luck and hopefully you can stick with it because we on here are selfish and want to see it finished.
Good luck till then and there is always fishing to do.
 

Mully

Newbie
Joined
May 15, 2022
Messages
26
Reaction score
66
Location
Ca
Got an update for those that are interested. Fully rebuilt 4l80e transmission and transfercase. Lots of research and some great parts installed. Went with a USSHIFT.COM controller, new drive shaft and someone wanted to see how I did the 14bolt emergency brake cables.
 

Attachments

  • 20230804_071457.jpg
    20230804_071457.jpg
    201.2 KB · Views: 19
  • 20230804_071508.jpg
    20230804_071508.jpg
    213.8 KB · Views: 16
  • 20230804_071653.jpg
    20230804_071653.jpg
    274.9 KB · Views: 19
  • 20230804_072633.jpg
    20230804_072633.jpg
    280.6 KB · Views: 19
Top