1997 gmc k2500 burban

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

yevgenievich

I'm Awesome
Joined
Jan 21, 2021
Messages
934
Reaction score
1,505
Location
TX
Fuel pump time. But still waiting for couple of pieces. Walbro 525 and pwm controller. Bigger wiring to the tank and in the tank.
You must be registered for see images attach
You must be registered for see images attach
 

yevgenievich

I'm Awesome
Joined
Jan 21, 2021
Messages
934
Reaction score
1,505
Location
TX
Oil pan good enough to use. And lower intake worked a bit.
You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach
 
Last edited:

yevgenievich

I'm Awesome
Joined
Jan 21, 2021
Messages
934
Reaction score
1,505
Location
TX
Great progress!

What paint did you use for the valve covers?
Thanks, It was just wrinkle black in a spray can.
Been running in to obstacles at just about every step. Need to relocate cam sensor mount, also had to drill out port for map sensor. Next need thicker intake gaskets and need to make a cover for distributor port.
 
Last edited:

yevgenievich

I'm Awesome
Joined
Jan 21, 2021
Messages
934
Reaction score
1,505
Location
TX
Even valve cover oil lip had to be made thinner to fit the heads. Wiring starting to look better and pedal mounted.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

yevgenievich

I'm Awesome
Joined
Jan 21, 2021
Messages
934
Reaction score
1,505
Location
TX
Problem and solution. Also finished couple of more details and it is ready to drop in. Except still waiting for the tcc seal to get here so I can put new torque converter in.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 
Top