HD Headlight Harnesses w/ 4 High Mod

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

S

sync

OBS Enthusiast
Joined
Apr 27, 2020
Messages
76
Reaction score
80
Location
Ohio
Has anyone bought the "waterproof" harness and found a convenient place to mount the box? I may be interested, I like that the fuse box contains everything (Relays AND fuses).

Also, the positive side, is your harness meant to connect to the battery directly or off the positive post at the fuse box?
 
5vortec7

5vortec7

Supporting Member
Supporting Member
Joined
Feb 28, 2018
Messages
391
Reaction score
520
Location
Denver
sync said:
Has anyone bought the "waterproof" harness and found a convenient place to mount the box? I may be interested, I like that the fuse box contains everything (Relays AND fuses).

Also, the positive side, is your harness meant to connect to the battery directly or off the positive post at the fuse box?
Click to expand...
I’ve measured out the wires to mount on the drivers side fender wall or top of wheel well in between pcm bracket and core support, and the power supply runs to the aux post on fuse box.
 
Nash

Nash

OBS Enthusiast
Joined
Jul 11, 2013
Messages
77
Reaction score
28
Location
Tn
sync said:
Has anyone bought the "waterproof" harness and found a convenient place to mount the box? I may be interested, I like that the fuse box contains everything (Relays AND fuses).

Also, the positive side, is your harness meant to connect to the battery directly or off the positive post at the fuse box?
Click to expand...
I mounted mine under the pcm. If you mount it to the rear of pcm and in low spot it will barely touch the pcm. I did not want to drill a hole in my fender panels and used the factory ground on the core panel/support. I have got to cut the ground and extend it about a foot or so it does not hit the tool box when I mount it. It will reach if you do not have the tool box.
 
Jesse_Wenting

Jesse_Wenting

Old Thread Reviver
Joined
Feb 5, 2020
Messages
340
Reaction score
394
Location
Kingston, Ontario
Nash said:
I mounted mine under the pcm. If you mount it to the rear of pcm and in low spot it will barely touch the pcm. I did not want to drill a hole in my fender panels and used the factory ground on the core panel/support. I have got to cut the ground and extend it about a foot or so it does not hit the tool box when I mount it. It will reach if you do not have the tool box.
Click to expand...
Love my little engine bay storage box lol. Most of what you'd ever need for a roadside repair on one of these trucks can be fit in there. Who needs an impact and floor jack then you have a wrench, hammer, and that sh1tty little scissor jack :pepper:
 
You must log in or register to reply here.

Similar threads

Spun-Cog Racing
4 high headlight mod
Replies
2
Views
574
Spun-Cog Racing
Spun-Cog Racing
tybcr783
Quad Beam Headlight Refresh
2 3
Replies
25
Views
3K
tybcr783
tybcr783
The Beast OBS
4x6 Amazon Demon Headlights & 88 C1500 HOW?????
2 3
Replies
24
Views
4K
drock
D
wiscomick
88-89 Headlight Set w/ Harnesses
2
Replies
10
Views
3K
wiscomick
wiscomick
R
Electrical problems with lights
Replies
1
Views
1K
Rev_S_Jones
R

Latest posts

Members online

Total: 1,646 (members: 39, guests: 1,607)

Forum statistics

Threads
64,247
Messages
1,389,732
Members
51,235
Latest member
ggddff

Share this page

Top