Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Wh4t3v3rs

I got real bass!!!!
Supporting Member
Joined
Jun 9, 2020
Messages
1,600
Reaction score
5,172
Location
Kansas
Looks good. Requested a quote for series g legend 18x12 set. Was looking for under 1k per wheel, and it has been hard to find anything that fits and looks decent
It really is hard to find something without spending a million dollars! I've been searching for over a year with no success....
 

Wh4t3v3rs

I got real bass!!!!
Supporting Member
Joined
Jun 9, 2020
Messages
1,600
Reaction score
5,172
Location
Kansas
I'll check it out.... but I'm not happy with it the way it is though. Idk, I'm just going to stop and think about it.... Try to figure out the best way to handle it.
 
Last edited:

thegawd

I'm Done!
Joined
Feb 29, 2020
Messages
2,265
Reaction score
4,253
Location
The Country Formerly Known as Canada!
my FIL thought it was a great idea to put a loop in a fuel line.... among other things.... then I bought the damn truck... my first. a 94 Burb. one day some lunatic was chasing me down and told me I was spray gas everywhere. well, that's no good and it wasnt before I left. anyways the outside of the loop had many cracks on it and a couple burst.

I dont know but I will never make a loop in a hose because of that. take the slack out.

No idea what I would do here though. maybe a molded piece so it doesn't get put under unnecessary stress.
 
Last edited:

Erik the Awful

Supporting Member
Supporting Member
Joined
Aug 9, 2019
Messages
7,610
Reaction score
15,516
Location
Choctaw, OK
I should clarify, I don't mean a full 360 degree loop. Just a C between the two fittings. That's the way it's done on turbine engines if the fittings are that close. You'd much rather have that hose crack than the aluminum fixture it's attached to. With that short of a hose, you're going to crack something expensive.
 
Top