Auxiliary driving lights.

ill have to look into those. I dont believe I came across them when I was looking.

i think I figured out a way that should work to have my hi and low on with high beams on my aux lights. but I wanted to run it by you guys to make sure there isnt something I am missing

high beam circuit connected to pins 86 and 30

pin 85 grounded

pin 87 connected into the low circuit on the aux.

this should in my head make my low and high beams come on while on high beams and be low beams only on when lows are on. my truck does have driving lights that are on whenever the truck is on but when switched to high beam the trucks low beam circuit is dead. I dont believe there will be an issue if I energize the low beam circuit after the factory harness because the factory relay for the low beams should be dead.

AuroraGirl said:

So you have a single dual filament bulb type?

Click to expand...

Yep.