TRUE DUAL OPTIONS - K1500 with Manual Trans

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

volfan72

OBS Enthusiast
Joined
Sep 17, 2021
Messages
53
Reaction score
68
Location
Nolensville TN
Much gratitude for any contributions regarding crossover pipe from drivers side exhaust to passenger side.

Mandrel bend options included. Minimum 2.5”

Photo for reference….system seems to be discontinued.
 

Attachments

  • D74035D2-E093-4F5F-B3C8-B103DC3EA05E.jpeg
    D74035D2-E093-4F5F-B3C8-B103DC3EA05E.jpeg
    166.1 KB · Views: 13

volfan72

OBS Enthusiast
Joined
Sep 17, 2021
Messages
53
Reaction score
68
Location
Nolensville TN
My apologies for the confusion. My thread could have been clearer. The image was just a reference

I am trying to determine the best location to run the exhaust tubing from the drivers side to the passenger side for true dual exhaust.

It appears behind the transmission and in front of the first crossmember???
 

b454rat

I'm Awesome
Joined
Jul 25, 2019
Messages
1,705
Reaction score
1,413
Location
Windsor NY
Pretty much has to go behind trans or t-case. From what I've seen a simple 90 off driver side, then another 90 to run along the pass side. I need to figure this out on mine as well...
 

volfan72

OBS Enthusiast
Joined
Sep 17, 2021
Messages
53
Reaction score
68
Location
Nolensville TN
Pretty much has to go behind trans or t-case. From what I've seen a simple 90 off driver side, then another 90 to run along the pass side. I need to figure this out on mine as well...
I’ll post pictures as soon as I get it figured out. I have an appointment at the exhaust shop Monday.

I’m thinking in front of the first crossmember. The second crossmember at the transfer case is much taller.
 

Supercharged111

Truly Awesome
Joined
Aug 20, 2015
Messages
12,617
Reaction score
15,246
Do you have longtubes? If so, you'll be crossing over back by or behind the t-case. With shorties or stock manifolds just cross over up by the bell housing.
 
Top