Will 2000 buick regal supercharged seats fit my 98 k3500?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Blazer92

Newbie
Joined
Feb 11, 2020
Messages
7
Reaction score
11
Location
Missouri
Yea same here I been looking at all the 90's cars and no luck. These are the 2000 regal seats I just need to know if these fit
I have them in my 92 k15 and I used the factory stands and power unit and used a flat piece of steel 1.5" x 1/4" as brackets to offset for the bolts. No welding on my part and same height. I can't get any pics right now it's at the body shop
 
Joined
May 24, 2021
Messages
25
Reaction score
15
Location
Florida
I have them in my 92 k15 and I used the factory stands and power unit and used a flat piece of steel 1.5" x 1/4" as brackets to offset for the bolts. No welding on my part and same height. I can't get any pics right now it's at the body shop
Cool thanks for the heads up. Wish u were able to get pics but I will do my best with the info u gave. I will go back to the salvage yard tomorrow hopefully they are still there
 

1989GMCSIERRA

I'm Awesome
Joined
May 2, 2014
Messages
547
Reaction score
599
You’ll need the seat brackets from either a set of truck bucket seats or find two bench seats and unbolt the brackets and sliders. The brackets are the tall type you normally see on the bench seats.
the buckets from a trans am, grand prix, regal or most bucket seats will bolt up to those brackets
if you have a bench seat yiull need to drill holes for the inner bracket closest to the trans tunnel. I would use riv nuts to secure the inner bolts.
 
Joined
May 24, 2021
Messages
25
Reaction score
15
Location
Florida
You’ll need the seat brackets from either a set of truck bucket seats or find two bench seats and unbolt the brackets and sliders. The brackets are the tall type you normally see on the bench seats.
the buckets from a trans am, grand prix, regal or most bucket seats will bolt up to those brackets
if you have a bench seat yiull need to drill holes for the inner bracket closest to the trans tunnel. I would use riv nuts to secure the inner bolts.
I appreciate the info and no I don't have a bench seat my truck is a quad cab so it has 2 buckets and a console up front
 
Joined
May 24, 2021
Messages
25
Reaction score
15
Location
Florida
Well I lost that war. .. seats were there but when I powered the motors to move the seats divers side skips so can't move it to get to bolts and pass side was dead
 
Top