Dually suburban build and maual swap, and one ton upgrades >;)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

duallburb

OBS Enthusiast
Joined
Feb 23, 2021
Messages
63
Reaction score
121
Location
burleson texas
i have a 1992 chevy suburban with a bad transmission\ transfercase? that is a former us govt vehicle. i also have a 1993 chevy k 3500 dually with an nv4500 and a bw 4401 t case. with a 14 bolt dually axle. any information is apriciated exept on my spelling. never learned. my plan is to move the hydroboost, the manual trans, tcase , dually axle, 8 lug front hub and duall setup on front and gear box (that i just put in the dually) to my 92 suburban and will be parting out the rest. of the dually that i dont use and what i pull from burban. booster box ect.. does anyone have a body manual on either vehicle or know the frame deminsions on either or both? also will be doing a facelift and headlight conversion, so ideas on that for a single headlight truck would be great.
will eventually be swapping burban motor to either a 400hp400tq 350 i have or a bib block that will either be holley efi or carb.. welcome to my madness 3500 tear down starts tomoro :) im exited i thing i have alot of it figured out not my first at to mt swap, i already mt swapped an elcamino but ran into frame issues on camy (its broken). there is another duallyburb in cleburne but have never seen it run. so if yall need anything and are local let me know.:)
 

duallburb

OBS Enthusiast
Joined
Feb 23, 2021
Messages
63
Reaction score
121
Location
burleson texas
i have my trans and tcase out of my donor truck along with clutch hydrolics and peddas assymbly. picture 1 is where the clutch assymbly goes. it is stamed onto thr firewall of the suburbans eaven though i dont think a manuel wass offered.. will have to weld an upper bracket to dash support but that is no big deal. the transmission is a nv 4500 and the t case is a bw 4401 will have to get an custom drive shaft made for it to go together will ceep all posted. last pics are of clutch assymbly that has the studs for the master cylender.. also will later convert it to hydroboost.
 
Top