Dravec
Unashamed 400 addict. Best. Trucks. Ever.
Because no matter what part of the South you live in, BBQ is a very serious thing! 
90 k1500
- Thread starter SouthernYankee
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
1ton-o-fun
Automotive Durability Tester
I started the food fight/hijacking of this thread... sorry.
It is a great truck starting point. Can't wait to see where it goes.
It is a great truck starting point. Can't wait to see where it goes.
SouthernYankee
OBS Enthusiast
Haha no worries man. It happens. At least it was good conversation [emoji23]
Sent from my iPhone using Tapatalk
SouthernYankee
OBS Enthusiast
Got the rest of the flares mounted on the truck. I’ll pop them back off when I get to the more serious body work so I can get the trim glue off.
Best $40 I’ve spent so far. Gotta love them junkyard finds!
Getting these on is really bringing the ideas I’ve been planning in my head to life.
Hoping to do an oil change this weekend to discover if the knocking noise is an issue with the engine or fingers crossed something less drastic.
Thanks everyone for the warm welcome thus far.
Sent from my iPhone using Tapatalk
You must be registered for see images attach
You must be registered for see images attach
Best $40 I’ve spent so far. Gotta love them junkyard finds!
Getting these on is really bringing the ideas I’ve been planning in my head to life.
Hoping to do an oil change this weekend to discover if the knocking noise is an issue with the engine or fingers crossed something less drastic.
Thanks everyone for the warm welcome thus far.
Sent from my iPhone using Tapatalk
BonestockK1500
LT265/75/R16
- Joined
- May 20, 2018
- Messages
- 1,054
- Reaction score
- 2,022
went to the Salt Lick bbq joint in Round Rock a couple years ago on my first trip to Austin and it wasn’t bad. And I’ve tried several Carolina joints from Bryson City to Asheville and they’ve usually been decent. Worst Bbq I’ve ever had in my life was in Albuquerque. I’ve just spent so much time enjoying Memphis BBQ in my life I’m kinda partial to Memphis over anything else.
SouthernYankee
OBS Enthusiast
Does anyone know what this is. I dropped a LED bulb behind it and cannot get it back out. My fingers are just too big but idk what it is or does so I’m being cautious. It’s near the blower motor on the passenger side behind the glove box. I was trying to change my glove box light when it slipped out of my fingers.
Also when cleaning the truck I found this unopened part under the seat. I can tell it’s been in there for a long time because the label is completely worn and I can’t make out anything. It kind of looks like a thermostat.
On a good note I replaced my license plate bulbs with LEDs buuuuut broke both of the lenses [emoji23]. I was not having the best luck last night. Has anyone used the plug n play LED pods off eBay?
Sent from my iPhone using Tapatalk
You must be registered for see images attach
Also when cleaning the truck I found this unopened part under the seat. I can tell it’s been in there for a long time because the label is completely worn and I can’t make out anything. It kind of looks like a thermostat.
You must be registered for see images attach
You must be registered for see images attach
On a good note I replaced my license plate bulbs with LEDs buuuuut broke both of the lenses [emoji23]. I was not having the best luck last night. Has anyone used the plug n play LED pods off eBay?
Sent from my iPhone using Tapatalk
I'm not sure but it could be the speed control (resistors) for your blower motor.
That looks like a wheel cylinder for your drum brakes.
east302
I'm Awesome
First picture is an air damper actuator - presumably for your recirc damper but I’m having trouble orienting myself in the picture. Never had an 88-94 before.
Not sure why they put the black and yellow bio-hazard looking tape on it.
Sent from my iPhone using Tapatalk
Not sure why they put the black and yellow bio-hazard looking tape on it.
Sent from my iPhone using Tapatalk
Frank Enstein
Best. Day. EVER!
If the engine is kakked consider a v8 swap. I am pretty sure the 350 has the same throttle body and injectors as the 4.3 but you will need a 350 chip.
I am not a fan of the 4.3. The power of a 4 cylinder with the fuel economy of an 8!
My 4.8 with 453000 miles 2003 ECSB 2wd got the same mileage as my wife's 94 Astro with 263000. The truck was heavier and will run circles around the Minivan.
I am not a fan of the 4.3. The power of a 4 cylinder with the fuel economy of an 8!
My 4.8 with 453000 miles 2003 ECSB 2wd got the same mileage as my wife's 94 Astro with 263000. The truck was heavier and will run circles around the Minivan.
SouthernYankee
OBS Enthusiast
I asked a friend at work & he too said it’s for the rear drums. Nice, one less part I need to buy haha.
Thanks guys for solidifying the info!
Sent from my iPhone using Tapatalk
Thanks guys for solidifying the info!
Sent from my iPhone using Tapatalk
Similar threads
Staff online
-
df2x44L60E Destroyer -
kennythewelderOfficially Retired, B31-3 (6-G) certified welder.
Members online
- JPVortex
- Tombbo
- JAR_19
- Used
- 99xcss4
- sethdm02
- Prospaceman
- Hipster
- movietvet
- Xanthrax
- df2x4
- wh89668
- 1998_K1500_Sub
- Rock Hard Concrete
- wojo-45
- maxol22
- 454ss1990
- Nad_Yvalhosert
- Sean Buick 76
- Mattcourt21
- toji2010
- someotherguy
- kennythewelder
- reddman6891
- Drunkcanuk
- maser
- Aussie Silverado
- papacharger
- Cujo
- SL1CKR1CK
- Alteca
- jeep bandito
- rzr6-4
- Vanishing Point
- MIHELA
- dubglock23
- Thenameless
- NSAIN
- T1najero
- Roggeriv
- jadisondaniels
- scott2093
- L31MaxExpress