Suburban1500
I'm Awesome
New front wiper arms the hook style with new blades. Is the drivers side supposed to sit that high?
You must be registered for see images attach
94 Blazer build
- Thread starter Suburban1500
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Does it touch the edge?
98chevy2500SS
Specializes in Accessories 101
Looks like that driver's side wiper arm needs adjustment. Pop the cowl off, loosen the two 10mm nuts and adjust it down. Then you should be good to go.
Are those the Dorman wiper arms? Thought about getting some for both trucks.
Are those the Dorman wiper arms? Thought about getting some for both trucks.
Suburban1500
I'm Awesome
Ah cool, thanks! And yeah they are, they look well built. Picked em up at Autozone.
noabarron3
OBS Enthusiast
It already looks great! Good luck and keep us updated, I’ll keep my eye on your thread.
This is mine:
https://www.gmt400.com/threads/light-blue-1994-chevy-blazer-4x4.50836/page-2
Suburban1500
I'm Awesome
Got the passenger seat in, just drilled new holes and used stainless bolts.
You must be registered for see images attach
You must be registered for see images attach
Suburban1500
I'm Awesome
Got a bunch of stuff to tune up! Also noticed oil leaking, no idea where it's coming from but I am pretty sure it is the valve cover gaskets. I have a set of new ones, so those will be going on this Sunday.
You must be registered for see images attach
You must be registered for see images attach
93sierrak1500
I'm Awesome
Where are y'all getting carpet? I have a 93 rcsb that is in bad need of almost a brand new interior. Carpet, seat cover, and dash.
Silvio Iacuone
OBS Enthusiast
Looks great
I have a similar oil leak. At 1st I was thinking oil sending unit. But now I believe it to be either valve cover gasket or intake manifold gasket. I am in the process of rebuilding my throttle body it should be completed by the end of the weekend. But have no intentions of putting it back in place until the above gaskets are replaced.
What gasket will you be using? Post plenty of images, interested on how it turns out
What gasket will you be using? Post plenty of images, interested on how it turns out
Similar threads
Members online
- BVRPLZR
- Icyagent
- 0xDEADBEEF
- Whiterado
- Kyle98750
- matt87
- goldoro
- Pinger
- Suburban1500
- AlanE
- someotherguy
- Road Trip
- dlmechanic
- Jerryred94silvy
- hatzie
- PlayingWithTBI
- Nick88
- bentlyw
- TR Wolfey
- Blazerbiker
- PolarBear
- mmac1318
- 618 Syndicate
- Isaac4456
- aaronb
- draggin61
- squeasel
- Moparmat2000
- Blake0
- heyitzjoel
- vince72
- BNielsen
- Tommy1234
- 1ofthesedays
- porky10001
- KLR TOMMY
- Komet
- strikk
- Fwbarre
- GMCGerbil247
- Dentc
- Shane B
- SEVEN90_PARTS
- SNCTMPL
- Danimal08
- Sabinoerc
- 95burban
- Keeper
- fancyTBI
- Sean Buick 76