Po339

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

[email protected]

Supporting Member
Supporting Member
Joined
May 12, 2014
Messages
312
Reaction score
94
I have this code on my 1997 5.7 tahoe. The truck would not start
Changed Crank position sensor and now truck runs but still have code. I am gessing the timing is off.
Can I still drive the truck to were they have a scanner to adjust timing (about 25 miles)
Thanks in Advance
 

east302

I'm Awesome
Joined
Oct 4, 2013
Messages
3,413
Reaction score
3,130
Location
Jackson, MS
Maybe you’re thinking of the CKP relearn procedure which is done after replacing the sensor. Any shop with a real scan tool should be able to do it.

You must be registered for see images attach
 

[email protected]

Supporting Member
Supporting Member
Joined
May 12, 2014
Messages
312
Reaction score
94
Thanks for the procedure . But what I was asking ,Can I drive the truck to where this can be done without doing any damage. The truck runs great .
 
Top