LS swap 1999 c3500 single cab lb

Carolina_'99Hoe said:

Progress

You must be registered for see images attach

xc_hide_links_from_guests_guests_error_hide_media

Click to expand...

Christian Steffen said:

Looking good!

Any pics of your intercooler routing?

Click to expand...

Carolina_'99Hoe said:

I can get some and post them, basically popped through fender liner and tucked on outside of frame rails on both sides. Tires don’t even get close.

Busy weekend so far, threw and exhaust on the truck so hopefully it will pass inspection . Dumped the 4” pipe from under the bedside until I fully decide where I want to run it. Then I drove it an hour each way on the highway to the junkyard to pick up a 6.0 and 4l80e. She does ok on the highway. Still has sone minor exhaust leaks in the engine bay.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Click to expand...

Christian Steffen said:

Awesome lol thanks

Click to expand...

Carolina_'99Hoe said:

Play with fire and you’re bound to get burned. 10.5:1 compression, pump gas, a little too much timing, and a 11 psi pull equal a dead cylinder.

good thing I got a spare short block lying around.

You must be registered for see images attach

Click to expand...

skylark said:

Whoops!

Click to expand...

Carolina_'99Hoe said:

Just ignore the doo doo looking welds. I was teaching myself to tig weld aluminum . They don’t leak tho.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Click to expand...

Carolina_'99Hoe said:

Play with fire and you’re bound to get burned. 10.5:1 compression, pump gas, a little too much timing, and a 11 psi pull equal a dead cylinder.

good thing I got a spare short block lying around.

You must be registered for see images attach

Click to expand...