WRITEUP: GM Remote MOD

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Dover

I'm Awesome
Joined
Sep 25, 2018
Messages
110
Reaction score
100
Location
Moriarty NM
Thanks man, don’t have any rn. Anything I could use beside that?

Nothing I have ever had any luck with. I made lots of solder balls that wouldn’t hold wires before I finally listened to someone and used flux [emoji2359]


Sent from my iPhone using Tapatalk
 

_nickjoseph

I'm Awesome
Joined
Aug 29, 2019
Messages
257
Reaction score
20
Location
Louisiana
Nothing I have ever had any luck with. I made lots of solder balls that wouldn’t hold wires before I finally listened to someone and used flux [emoji2359]


Sent from my iPhone using Tapatalk
Thanks man, will have to get some and try to solder this in the remote tmr
 

Mangonesailor

I'm Awesome
Joined
Apr 19, 2014
Messages
1,081
Reaction score
992
Location
Triad, NC
Latest posts are a little old, but, this should help you guys out.

Wish my thread was a sticky. The Fob mod ain't worth it.
 

cngodfather

I'm Awesome
Joined
Nov 20, 2019
Messages
146
Reaction score
54
Location
Crown Point, IN
For someone who wants to try to do it. You have to consider a couple points. The wire that you add should only connect to the part that you are soldering to. any bare copper cannot touch any other metal in the unit. The other point is that antenna length will determine what frequency will work best. I would try experimenting with different lengths to find the best one.
 
Top