92 bagged project

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Needs15

OBS Enthusiast
Joined
Aug 22, 2018
Messages
81
Reaction score
132
Location
Alberta Canada
how close are those 20" us mags to the fender... i wanna run the 22s but i dont think they have enough backspacing?
When it's layed out I have about an 1 5/8" with a rolled fender lip, I could get a tighter roll on the lip and might gain a quarter of an inch, and then at the closest point it gets to about 5/8"
 

Channeled 91

Manic Mechanic
Joined
Mar 24, 2019
Messages
399
Reaction score
516
Location
Aiken, SC
Got the bed floor raised up and strarting to play with ideas for closing out the gap in the back
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach

I want to do this to my bed end.
You must be registered for see images attach
 
Last edited:

brianmcb

I'm Awesome
Joined
Jan 23, 2018
Messages
177
Reaction score
130
Location
CA
Sweet. What 4 link kit is that one?

95 rcsb, L33 5.3, hot cam, hp tuners, 4/6 drop
 

Needs15

OBS Enthusiast
Joined
Aug 22, 2018
Messages
81
Reaction score
132
Location
Alberta Canada
Sweet. What 4 link kit is that one?

95 rcsb, L33 5.3, hot cam, hp tuners, 4/6 drop

It's a Thorbros heavy duty universal 4 link with unwelded bars so I could set the length I wanted to go with. I think the bars are 1.5 od which is overkill for this little truck but works fine .
 

Needs15

OBS Enthusiast
Joined
Aug 22, 2018
Messages
81
Reaction score
132
Location
Alberta Canada
Made a new rear crossmember as well as designed 4 of the 6 raised bed mounts that I'll transfer to my plasma table to cut out and weld together.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 
Top