Ok new to this and don’t even know if this is the right thread for this.
I did a 4.3TBI to 5.7 TBi on a 94, swapped over the engine harness and pcm. It cranks and runs if you pour gas in the throttle body (until burned up) but not getting power/pulse to the injectors. The 5.7 was running before I dropped it in my 94. Fuses are good. Anyone know where I should start at?
I did a 4.3TBI to 5.7 TBi on a 94, swapped over the engine harness and pcm. It cranks and runs if you pour gas in the throttle body (until burned up) but not getting power/pulse to the injectors. The 5.7 was running before I dropped it in my 94. Fuses are good. Anyone know where I should start at?
