Swap Meet Slam

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

WILWAXU

I'm Awesome
Joined
Sep 12, 2018
Messages
276
Reaction score
616
Location
League City, TX
Busy week at work and awaiting parts, so.. lots of little details coming together
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach

You must be registered for see images attach
 

WILWAXU

I'm Awesome
Joined
Sep 12, 2018
Messages
276
Reaction score
616
Location
League City, TX
Along with the StreetGRIP suspension, I upgraded the standard 1990 (88-91) small bearing hubs and brakes to "HD" spindle/rotors/brakes. Which were standard on 1992-up trucks.

Since I was already replacing the spindles, moving to the thicker rotor (1.25" vs. 1") and bigger bearings was an easy decision.

For those that may want to do this "upgrade" on an 88-91 truck. I ordered spindles, rotors (bearings), and calipers for a 1992 truck. Total cost for the new brake parts was around $230. Spindle cost will depend on what you decide to go with, in my case the spindles came with the RideTech kit.

You must be registered for see images attach
 

WILWAXU

I'm Awesome
Joined
Sep 12, 2018
Messages
276
Reaction score
616
Location
League City, TX
ACC carpet from @lmctruck :waytogo: The instructions say there might be extra material... that ‘might’ be an understatement ;) Dash touchup and sound deadener in :)

You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 
Last edited:

WILWAXU

I'm Awesome
Joined
Sep 12, 2018
Messages
276
Reaction score
616
Location
League City, TX
Interior weekend. Interior is getting closer, the detail parts always take the most time... and of course chasing down strange electrical gremlins.

Wheels and tires are ordered. Any guesses on what is coming?

You must be registered for see images attach
You must be registered for see images attach
 

WILWAXU

I'm Awesome
Joined
Sep 12, 2018
Messages
276
Reaction score
616
Location
League City, TX
Well, it's on the ground... and in need of an alignment. That's what happens when you change everything :D

I am very impressed with wheelsforless.com, they nailed the offset/backspacing and tire selection.

Classic Torq Thrust II

Front
20x8 - OS: 0mm, BS: 4.5"
245/40R20 Nitto NT555 G2

Rear
20x10 - OS: +6mm, BS: 5.75"
275/40R20 Nitto NT555 G2


You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 
Top