2500 2wd need help!!
- Thread starter Robert Spencer
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
NightRunner
Resident Junkman
How high are you looking to go? You could always do a coil spring spacer up front, a small lift block in the rear and a 3" body lift to get maybe 5" or 6" of overall lift.
Robert Spencer
Newbie
was basically only looking to level the truck and clear a 33x12.50 on a 20x12 wheel or maybe a 22x14 and im ok with trimming on the bumper and fender....Just heard nothing but bad things about the spring spacers (ride terrible?, hard to align, etc) so was looking for a spindle lift but have found nothing and was hoping someone had run into the same problem
NightRunner
Resident Junkman
You're right on both those parts about spring spacers. I'm curious if you could throw a set of 3500 coil springs up front to squeeze a little more lift up front but I doubt it. If you really wanted it level, you could throw a set of 2" lowering shackles in the rear to level it out and then body lift it 3" and trim for the 33s. Kind of counter productive, but it'll be level lol.
Maybe some lifted C2500/C3500 guys can get in here and help you out better than I can though.
Maybe some lifted C2500/C3500 guys can get in here and help you out better than I can though.
NightRunner
Resident Junkman
Also, according to this Amazon ad by a suspension manufacturer, the 6 lug 2500 can fit the 1500 spindle setup but not an 8 lug 2500. Not sure what the difference is, check the FAQ:
https://www.amazon.com/1998-Lifting-Spindles-blocks-U-Bolts/dp/B00NBE0TRQ#customerReviews
https://www.amazon.com/1998-Lifting-Spindles-blocks-U-Bolts/dp/B00NBE0TRQ#customerReviews
Robert Spencer
Newbie
lol thats definitely an idea
Similar threads
Latest posts
-
-
-
1998 GMC c1500 sierra missing front and rear sway bar
- Latest: GMCGerbil247
-
-
Staff online
-
df2x44L60E Destroyer