-
-
they (ie dorman) make studs with oversized knurls or you could go up a size but would need a new lugnut. For a road repair why not epoxy... -
Running on 7 studs ok as long as your not loaded to max GVWR. I would put some spot weld in the rounded off part file to fit and pound...
-
You still didn't answer the question . Did you strip the splines off the stud where its pressed into the hub. Or strip the threads off...
-
Voyhager3 replied to the thread K2500HD rounded off wheel stud.My bad gang, been busy, the hub rounded off, I went out a bought a new stud and verified it just spins in the hub. Hopefully will get...
-
Put 3 heavy tack welds on it & send it!!!
-
Mig weld it.
-
This is what I came here to suggest.
-
You just gotta cowboy up!
-
Voyhager3 reacted to BBslider001's post in the thread 1998 K2500 HD 6.5 "Smallest Red", From Scrap to Scavenger with
Love.
This is what is called TENACITY my man. No quit. Solid work!! I’ll bet she is gonna be one hell of a truck. -
Voyhager3 replied to the thread 1998 K2500 HD 6.5 "Smallest Red", From Scrap to Scavenger.Got the new one in, I got it most of the way but had some issues getting the fitting reseated. Got some help, and after rebleeding...
-
Voyhager3 reacted to Supercharged111's post in the thread 1998 K2500 HD 6.5 "Smallest Red", From Scrap to Scavenger with Like.
That's an easy fix, most parts stores will stock a short section of fuel line with the end you need. Just cut the old line and install...
-
Voyhager3 replied to the thread 1998 K2500 HD 6.5 "Smallest Red", From Scrap to Scavenger.Well tried to get the new pump in, can’t, one of the lines has a fitting that seized/ rusted well into place. I out another 4 hours into...
-
I wouldn’t let one missing lug out if eight stop me from getting it home and dealing with it there
-
Voyhager3 replied to the thread K2500HD rounded off wheel stud.*I probably should clarify, home is over a 1000 miles of interstate away. I know I can absolutely drive on 7, but for other reasons and...
-
Are saying you buggered the splined end in the hub? If it's only one lug stud , drive on go home. Get a new or used serviceable at home.
-
-
Loading…
-
Loading…
Members online
- reaghcharley
- DieselTech
- Rlaland
- Sean Buick 76
- Drunkcanuk
- evilunclegrimace
- PlayingWithTBI
- frederik
- rowanj59
- Silverbishop
- Supercharged111
- Char
- Woody9102
- brennsy
- 1991cheyenne
- Deuce95
- Road Trip
- LaRojita92
- BNielsen
- Smurf
- Nad_Yvalhosert
- Mick478
- bc-chris
- Orpedcrow
- tybcr783
- FullyLeaded
- Vanishing Point
- LTC_
- 95burban
- Frankgomez
- MoPowahBehBeh
- ZSZLawanna
- tppower
- TXDevilDog
- nurhan
- Joe Dirte
- grzmnky
- 97silverado3500
- Darth07
- mickey1332
- broyea1341
- Brwnelky
- Jessie c1500
- Caman96
- 99GMC_CCSB
- Mustang-22
- fmueller
- SwampNinja
- Ccato
- GBENAVIDEZ94