Recent content by ViEJO_C1500

  1. ViEJO_C1500

    Drive Shaft Length ??? ???

    so I have a 1991 single cab long bed 1/2 ton 5.7L engine. the length of my drive shaft is about 77inches. it was recently damaged after the c notch flip :mad: so I need to find one at my local junk yard. I know the short bed drive shafts are to small but are there any other options if I cant...
  2. ViEJO_C1500

    91 C1500 C notch problems

    ya I had no idea and needed help. glad I got it done.
  3. ViEJO_C1500

    91 K1500 350 TBI Running Rough

    was the truck parked for a while prior to you buying it? you might want to do a routine maintenance run on it. I would also test the fuel pressure. you can rent a tool from a hardware store if you don't have one or want to purchase one,
  4. ViEJO_C1500

    91 C1500 C notch problems

    whats up... I did end up going to the junk yard and getting to stock hangers. I'm leaving the drop shackles for a 7 inch drop. I ended up answering my own question :33: the rims are US Mags Rambler model and they are 20"s did not want to go any bigger for now:evillol:
  5. ViEJO_C1500

    91 C1500 C notch problems

    bruh....?
  6. ViEJO_C1500

    91 C1500 C notch problems

    pics posted. can't I just swap out the shackles and replace them with the stocks and call it done??
  7. ViEJO_C1500

    91 C1500 C notch problems

  8. ViEJO_C1500

    91 C1500 C notch problems

    thanks for the help and advice! couldn't I just get away with swapping out the belltech shackles for the stock shackles and keep the belltech hangers?
  9. ViEJO_C1500

    91 C1500 C notch problems

    Thanks for the help bro. the driver side hanger is a ***** to get to. couldn't I just change out the belltech shackles to the stock shackles ?
  10. ViEJO_C1500

    91 C1500 C notch problems

    hey everyone, I've been gone for a while but now I'm back... with a problem:( . so I just purchased the belltech c section kit for my 91 c1500 2wd single cab 5.7L truck and have been installing it myself. Here is where I am stuck :My truck currently has the belltech lowering shackles and hangers...
  11. ViEJO_C1500

    1998 3500 7.4L idle too high?

    ya that's what I meant . ok ill pull that an see how it runs after
  12. ViEJO_C1500

    1998 3500 7.4L idle too high?

    so this past week me and my brother in law did a motor swap on my dad 3500 truck . it had the original 454 with a blown rod until we swapped it out for another 454 from our local salvage yard. they're both vortec engines but there seems to be an idle issue. the newly installed motor is running...
  13. ViEJO_C1500

    Difficult to change upper control arm bushings? advice?

    thanks for the response guys. I recently rebuilt this truck to be a daily driver . in the past month, suspension wise, I did replace the front shocks. the truck is lowered with bell tech spindles (that's the way I got it) and rides smooth. I inspected the ball joints and other bushings and they...
  14. ViEJO_C1500

    Crate engine

    I just purchased a 350 tbi create motor from jeggs recently, I am very happy with my purchase. I know its not the same motor for your 98 but should still have the gm warranty. my truck is a complete night and day difference after putting in the new motor! highly recommended if your current...
  15. ViEJO_C1500

    91 c1500 Going 2" Lower Up Front

    I think your truck looks great the way it is in my opinion. my truck sits with the front end down an the ass in the air. it drives me crazy. I liked the leveled look all the way around like you have.
See more

Latest posts

Members online

... and 11 more.
Total: 1,475 (members: 61, guests: 1,414)

Forum statistics

Threads
64,339
Messages
1,391,567
Members
51,448
Latest member
Tbuttion

Share this page

Top