Recent content by TSALI137

  1. TSALI137

    5.7L Cold Air Intakes?

    I know this post is extremely old but I'm pondering the same question myself. I have a 4in cowl hood on my 97 for clearance issues with the intake spacer and 80mm big bore throttle body on a built engine with unfortunately OEM style mpi injection set up, would love to obtain a marine intake fuel...
  2. TSALI137

    AC Delco 41-993 spark plug issues

    Bad thing is the tube is bent so far over that it melted the MSD plug wire and then it cracked causing it to arc on the header. if they weren't ceramic coated I'd give them a good hammer tap for space.
  3. TSALI137

    AC Delco 41-993 spark plug issues

    Hp74 crate engine from ATk. https://atkhp.com/product/atk-hp74-chevy-350-vortec-1996-2000-truck-base-engine-315hp/ Stupid phone changed fouled to fowled, I guess because I'm always typing about birds. Anyway, 41-993 supposed to be iridium. I'm also replacing with Accel p526s shorty plugs...
  4. TSALI137

    AC Delco 41-993 spark plug issues

    Has anyone had issues apart from the one post of no start on new plugs? It's a couple years old now. So I put new engine in a year ago and fast forward 12,000miles or 18months, and I'm fixing to have to install a new set of plugs wires and distributor cap. Mainly plugs, but here's the kicker...
  5. TSALI137

    1999 14 bolt backing plates

    I'm late to this post but I have a set of 13in back plates and drums off a 98 k2500 8lug 9.5 14bolt. Just message me if still looking.
  6. TSALI137

    14 bolt swap question

    I read through this and I know it's an old post but maybe this will help someone else. Yes they can have LSD'S in the K2500/K1500 9.5 14bolts, and just to clarify yes it's the wider 4x4 axle. I'm installing one from a 1998 k2500. Also be aware that it's not just a simple 8 lug shaft to 6lug...
  7. TSALI137

    1500 heavy half 14 bolt Qs:

    I read through this and I know it's an old post but maybe this will help someone else. Yes they can have LSD'S in the K2500/K1500 9.5 14bolts, and just to clarify yes it's the wider 4x4 axle. I'm installing one from a 1998 k2500 that had an OEM LSD instead of the Govlock posi. Also be aware that...
  8. TSALI137

    Did I totally bung up my swap? (97, 1500, 4l60e, 1 vs. 2 piece)

    Based on my experience having a 97, built in 96 with a 1piece transmission, you have to have a 97 1piece to bolt and plug up exactly without modification based on mechanics and transmission shops/ builders. However based on so called professional mechanics lately I don't trust them, not all, but...
  9. TSALI137

    PRNDL switch

    The transmission. I would have still left the black box PCM in and then it would still work the transmission, but without the TPS sensor the 4l60e wouldn't work correctly, same way 700r4 won't work with out the detent cable or a th350 or th400 without a vacuum line. I put a carburetor on my...
  10. TSALI137

    PRNDL switch

    97 the bottom switch
  11. TSALI137

    PRNDL switch

    I finally sent them a picture showing it called both and asked how they were adjusting it the other week if I didn't have one in the truck. Otherwise I'd have a mess of wires bypassing it. I've run into some crazy stuff here lately. Next time I'm putting a carburetor with TPS sensor and saying...
  12. TSALI137

    PRNDL switch

    I don't mean to sound stupid, but can someone tell me what a prndl switch is verses the 4l60e neutral safety switch. Pretty sure it's the same thing but apparently not according to what I'm being told now by the people who tuned my truck. If anyone wants to hear some crazy stuff private message...
  13. TSALI137

    High idling in gear and taking long time to idle down at a complete stop

    It was definitely a vacuum leak. Did a smoke test and found it. Then I replaced the upper plenum from where they messed it up when installing the engine. I put my old one back on that was new in November on my old engine. https://photos.app.goo.gl/CanpoZzDTDxaWLR78
  14. TSALI137

    High idling in gear and taking long time to idle down at a complete stop

    Replaced upper plenum, problem solved. No more leaks as can see in video below. https://photos.app.goo.gl/EftV347qtb37PiEY7 One other thing I might add, everything is brand new and been replaced once, twice and some 3 times since installing the new engine in February. The only thing I've not...
  15. TSALI137

    High idling in gear and taking long time to idle down at a complete stop

    Here's a long video of how it's idling https://photos.app.goo.gl/Amwmf9mu5CygqvtL8
See more

Latest posts

Members online

... and 16 more.
Total: 1,535 (members: 66, guests: 1,469)

Forum statistics

Threads
64,228
Messages
1,389,160
Members
51,170
Latest member
Chase33

Share this page

Top