Members

toolmakerson

I'm Awesome From New Jersey

Joined: Jul 5, 2024

Last seen: Yesterday at 12:24 PM

Latest activity Postings About

- T
  
  toolmakerson replied to the thread Vortec 350 cutting out during acceleration.
  
  since it's doing it so much (problem is now easy to reproduce), if you have a scan tool on it, you'll have plenty of time to observe...
  
  Yesterday at 12:24 PM
- T
  
  toolmakerson reacted to movietvet's post in the thread So Many Options with Like.
  
  Yea, what happens they try cheap first and then when the quality price is given, they have already spent some of the money on the wasted...
  
  Yesterday at 12:41 AM
- T
  
  toolmakerson reacted to big farm-ah's post in the thread So Many Options with Like.
  
  That's a big deal. My buddy ran a garage for many years and when he was going out of business he told me to go ahead and use his...
  
  Yesterday at 12:41 AM
- T
  
  toolmakerson replied to the thread The FREE Thread.
  
  purified boiled linseed oil...
  
  Tuesday at 9:42 PM
- T
  
  toolmakerson reacted to someotherguy's post in the thread 1997 C1500-Father/Daughter Project with Wow.
  
  Debatable, for sure. Lots of people run without them and never have an issue. I've done it too, on many vehicles, for many miles...
  
  Tuesday at 1:35 PM
- T
  
  toolmakerson replied to the thread Vortec 350 cutting out during acceleration.
  
  Two quick easy suggestions to prevent possibly dangerous road condition of "dead truck" - Did you check the fuel pump ground wire ? It...
  
  Tuesday at 1:22 PM
- T
  
  toolmakerson reacted to KleenScottsdale's post in the thread Needing opinions with Like.
  
  Last summer I replaced inner and outer rockers, cab corners and lower door skins... and I had no prior welding or auto body experience...
  
  Tuesday at 12:53 PM
- T
  
  toolmakerson reacted to kephas's post in the thread SOLVED: Extremely High Pressure (>120psi) on Low Pressure Side of AC - 1999 Suburban with Rear AC with Like.
  
  Turned out to just be user error. After leaving the gauge valves shut, pressures came out to normal levels. I ended up putting more...
  
  Monday at 8:44 PM
- T
  
  toolmakerson reacted to skylark's post in the thread Dual Saddle Tanks on OBS?? with Like.
  
  The c3500hd add dual tanks from the factory. It used a balance module mounted on the frame rail and a transfer pump. It monitored the...
  
  Monday at 4:09 PM
- T
  
  toolmakerson replied to the thread Oh no......
  
  Easy, just follow the Bible; total restitution + 20%. If the thief does not have enough to repay, he goes into servitude to work it...
  
  Saturday at 10:43 PM
- T
  
  toolmakerson replied to the thread Oh no......
  
  Hmmm... they have everything the last few decades, lol. The one other thing is if fasteners are hardened, like 60+ HRC. Try to cut...
  
  Saturday at 10:16 PM
- T
  
  toolmakerson reacted to Road Trip's post in the thread Carb Conversion Fuel Pressure with Like.
  
  If you look closely at the wiring diagram, both the Fuel Pump Relay and the separate Fuel Pump Oil Pressure Switch are connected to...
  
  Saturday at 9:52 PM
- T
  
  toolmakerson reacted to Lyonsperf's post in the thread What ******... with Like.
  
  decided to put the crossmember directly below the rear pan bolts? Now let me say, I work on automatic transmissions every day. My 95 GMC...
  
  Saturday at 9:33 PM
- T
  
  toolmakerson reacted to Road Trip's post in the thread Carb Conversion Fuel Pressure with Like.
  
  I reread the thread, and this was a question of yours that I missed. The short answer is that the only direct influence that engine oil...
  
  Saturday at 9:32 PM
- T
  
  toolmakerson replied to the thread 1994 K1500 fuel mileage??.
  
  Ah, so you're a pilot. My father had his private license, took me with him when i was a kid. First time they say i was 3 weeks old...
  
  Saturday at 9:31 PM
Show older items
Loading…
Loading…