Recent content by Tim W

  1. Tim W

    Brake lights

    I remembered I did a multifunction switch a few months back and I depined the plugs to make them easier to fish through column. I saw on a wiring diagram that the white wire also gives juice to the brake light switch. I checked and the white wire was not fullly seated in the plug and was...
  2. Tim W

    Brake lights

    Problem has been solved.
  3. Tim W

    Brake lights

    I need a coffee break. The relay clicks when I press the pedal but Im not sure its sending power back all the time. The issue is intermittent. Its tuff doing this by yourself. Alot of getting up and getting down. I havent connected any wires to anything. I haven't checked an OE service manual...
  4. Tim W

    Brake lights

    While having box pressed on the brake pedal i did a little more wire probing. When I unplug the taillights and plug them back in I lose power. I probed all the way to the drivers door and the brake light switch had power but the other yellow wire did not. While testing , the brakes light just...
  5. Tim W

    Brake lights

    I have an issue thats got me stumped... my 94 silverado's brake lights work Intermentally But my third brake light works as it should. I've checked the fuses and all fuses are good and I can hear the relay clicking, In fact I actually have power to the relay that I checked with a test light...
  6. Tim W

    How to Put a Vortec Motor in a TBI Truck

    For what its worth i have a vortec block, and vortec heads in my 94. I still run the TBI h20 pump, but have a 180° acdelco thermostat. I do not have any holes drilled in my block or heads. I do however, have the coolant bypass hole in my H20 pump blocked off. I have the heater hose plummed...
  7. Tim W

    multifunction lever

    I got it. I bent it a little more with some heat. Both holes line up now.
  8. Tim W

    multifunction lever

    After tearing into the streering column i discovered the issue. When i got the truck it had some janky ebay after market steering wheel. I guess when who ever put the wheel on damaged the lock plate cover and it was interfering with the blinker movement. I heated the cover up where it was...
  9. Tim W

    multifunction lever

    I went ahead and ordered the whole acdelco assembly. Iv watched a few videos. Im pretty mechanically inclined. The job seems pretty straightforward. Seems even easier if the new plug is depined instead of trying to disassemble the entire colum and wrestling the plugs through.
  10. Tim W

    multifunction lever

    Thank for the info. Is it a hard job to do or pretty straightforward?
  11. Tim W

    multifunction lever

    Good morning yall, On my 1994 chevy silverado the turn signal lever (multifunction lever) wont lock in the up position but it locks in the down position. This just started today. What could be going on w it? all signals, wipers cruise controls ect work. You just have to hold the lever up to...
  12. Tim W

    Garage custom, little bit of this and that.

    Its gona be a nice build
  13. Tim W

    90 grille on 94+bumper mount question

    Im piecing together all the pieces to do a 88-93 grille swap to my 94. I saw a video of a 93 silverado grille removal and it looked like the 93 had some kind of piece that clips in the top of the grille like a filler or something. What is that? Is the circled piece in the picture the part in...
  14. Tim W

    Adjusting bumper mounts

    Front or rear? The front bumper brackets are different. The 94 stick out a little further. Im in the current process of backing dating my grille onnmy 94 to the 90 -93. Theres alot of little pieces to buy to do it "right" If its the rear make sure you dont have the brackets for a stepside...
  15. Tim W

    Holley Classic Bumpers?

    I cant speak for their bumber, but i have their grille and it a very nice piece. Fit and finish are great
Top