Honestly its kind of difficult to find good patch panels. The metal is usually thinner and the shape is similar but not quite a perfect match sometimes not even close.
I just finished cab corners, bed wheel arch, and rockers on my truck and not a single one fit. Also shipping is expensive and...
As mentioned above, while they are not necessary, they will change the sound and gain you a little torque. In a stock to mild application it probably wont be enough to measure acceleration wise, but it will sound different. The older muscle cars typically have no crossover and give a rougher...
That looks pretty similar to mine, although it's hard to tell based on a closeup. It is difficult to compare an image from a computer screen as different screens will change the color slightly. Furthermore the business that took the photo of the carpet probably used artificial/diffused light...
I don't have a scanner except for the u shaped paper clip code reader. Tomorrow I will purchase an infrared thermometer but I have a sneaking suspicion the temps are fine.
Would a failing gauge motor cause the needle to start rising slowly to a point then drop back down quickly to the actual...
Hello I have a 94 Blazer that has an unusual problem of the gauge jumping up to 260 degrees and then after a couple of seconds dropping back down to 210. This will happen at cruising speed, in town, and even at idle. I replaced the thermostat as well as the coolant sending unit in the head. The...
Hello, I have a 1991 C1500 and ever since I bought the truck the doors would lock but not unlock. This has been baffling to me because the lock/unlock just switches polarity. At first I thought it was the switch itself but both doors will function perfectly locking but does note even make a...
For your next upgrade, I would think a camshaft change would be the only other thing that would be noticeable. A cam with an operating range of say 1000-5000rpm would work nicely. The Comp Cams 252XFI HR-13 would be great for extra power without loosing fuel economy.
While I do not have a specific cam suggestions, I can tell you that you will want a cam with less overlap than naturally aspirated camshafts. There are specific forced induction cams that will work very well in your application.
When looking for cams, you need to have a vision for how you want...
Hi I'm new to this forum but I have a newbie question for you guys.
My question is concerning the torque converter lockup on the 4l60e transmission.
I'm not a fan of the automatic transmission in general because of the way it drives. I've extensively driven a 94 blazer, 08 duramax, and my 93...