Members

s_morse

Newbie From Washington

Joined: Oct 29, 2024

Last seen: Sunday at 10:10 PM

Latest activity Postings About

- S
  
  s_morse reacted to RokRoland's post in the thread Sagging door fix? with Like.
  
  I don't get how quite a few people in this thread seems to ignore the original poster's issue and dismiss it with "overthinking"...
  
  Sunday at 8:07 PM
- S
  
  s_morse replied to the thread Sagging door fix?.
  
  Update, finally got around to installing the Cunningham kit before I left town last week. Unfortunately didn't improve the sag at all...
  
  Sunday at 5:52 PM
- S
  
  s_morse replied to the thread Door locks frozen locked.
  
  If you have an aftermarket remote lock module, removing that would be my first step. If not, first thing I would check is that there...
  
  Sunday at 4:36 PM
- S
  
  s_morse reacted to HotWheelsBurban's post in the thread Door locks frozen locked with Like.
  
  Unfortunately you do have to have the door open, to get the panel off, and the window needs to be up. You might have to remove most of...
  
  Sunday at 4:10 PM
- S
  
  s_morse reacted to someotherguy's post in the thread 1988 K2500 door lock rods/pawls with Like.
  
  The pawl (red circled piece) looks like it's for a 3500HD, which uses a different exterior handle, uses different rods, too. Richard
  
  Nov 24, 2024
- S
  
  s_morse replied to the thread 1988 K2500 door lock rods/pawls.
  
  I wasn't able to find the GM part number, but ordered a couple of the pawls from LMC. Hopefully that will fix the problem. I knew the...
  
  Nov 24, 2024
- S
  
  s_morse reacted to jd33173's post in the thread 1988 K2500 door lock rods/pawls with Like.
  
  that does not look right to me... check out this video: youtu.be/BKrn5tiR1vw?t=488 the stuff in the red circle is nothing like the stuff...
  
  Nov 23, 2024
- S
  
  s_morse reacted to jd33173's post in the thread 1988 K2500 door lock rods/pawls with Like.
  
  I would also recommend you invest in some of the clips that hold the rods in place as well as the ones that hold the back of the lock...
  
  Nov 23, 2024
- S
  
  s_morse posted the thread 1988 K2500 door lock rods/pawls in Paint / Body / Detailing.
  
  While waiting for some other door parts, I replaced the door lock cylinders on my 1988 K2500. They are new OE/ACDelco parts. Truck has...
  
  Nov 23, 2024
- S
  
  s_morse replied to the thread Sagging door fix?.
  
  I still haven't gotten around to installing the bushings, replacing a window regulator first that's supposed to get here tomorrow. But...
  
  Nov 21, 2024
- S
  
  s_morse reacted to Sean Buick 76's post in the thread Sagging door fix? with Like.
  
  I would weld it up and re drill it. Not much skill required just a little persistence.
  
  Nov 21, 2024
- S
  
  s_morse replied to the thread Sagging door fix?.
  
  That's basically what I was looking at yep. Had the same issue with the Amazon link in my original post. I agree that if you use this...
  
  Nov 12, 2024
- S
  
  s_morse replied to the thread Sagging door fix?.
  
  Thanks all for your input I ended up ordering the Cunningham kit. The price was a little painful but I figure may as well do it right...
  
  Nov 12, 2024
- S
  
  s_morse reacted to Jeepwalker's post in the thread Sagging door fix? with Like.
  
  YEP! There is a cheaper way: Just replace the bushings ....for less than the price of a Whopper!...lol ....New Bushings Click HERE. The...
  
  Nov 12, 2024
- S
  
  s_morse reacted to Erik the Awful's post in the thread Sagging door fix? with Like.
  
  I'll be the fourth person to tell you to throw those in the trash and go straight for the Cunninghams. I've done those bushings, and...
  
  Nov 12, 2024
Show older items
Loading…
Loading…