Recent content by Roadrunner

  1. Roadrunner

    "ODB"

    I got a little bit more work done today on the truck. Most of it was focused around the drivers door and getting a working door key. When I got the truck I didn't get a door key with it so after fixing the door handles, window motor and hinge pins it was time to get a key made so I can finish...
  2. Roadrunner

    I call this one Gold Digger.

    Hopefully this is going to be the last gmt400 I get going for a while until I find a crew cab and i think that brings the count to 5 trucks being built currently. I call this one Gold Digger because it's on it 3rd build to date and I've sunk lots of money into it more than a few times. When I...
  3. Roadrunner

    "ODB"

    I pulled this one into the shop today after getting some parts ready from a parts truck I bought last week. Most of the parts I have for it this time is interior related. I started out by replacing the interior door handles with some new Chinese replacements and straightening out the handle...
  4. Roadrunner

    Jayne the shop truck

    I made more progress today and started finishing the dual exhaust. I had previusously got from the manifolds back to just past the frame crossmember in 2.25" pipe off a k1500 project I started a few weeks back. This go around I got from the bumper to the end of the mufflers in 2.5" pipe plus...
  5. Roadrunner

    94 4l60e- 98 4l60e conversion

    It will fit but your going to need to use the computer and wiring harness for the 96.
  6. Roadrunner

    Jayne the shop truck

    I got a parts order in a few days ago with a few of the maintenance items that I noticed that needed to be addressed. This evening I installed a new serpentine belt, thermostat, and water neck. Everything is moving along well with the shop truck now and its turning into a solid truck. In the...
  7. Roadrunner

    94 4l60e- 98 4l60e conversion

    For the most part everything swaps around fairly easily. There are a number of differences between 94 and 98 though. Off the top of my head the 98 got a 2 piece case and larger input shaft. Where your going to run into problems is the 94 does not have pwm torque converter lock up. I think the...
  8. Roadrunner

    "ODB"

    I've done a little bit more work to the old truck over the past couple days and found a number of other things that need to be fixed up. To start with the front end needs a good bit of work. It looks like I will be replacing the pitman arm, idler mount and idler. The transmission is also...
  9. Roadrunner

    "ODB"

    I got this cursed turd running today. Got the motor stabbed and most of the kinks worked out on it. There are a few things to sort out still on the motor but it runs okay for being cobbled together with spares and what I could save from the blown motor. Seems like the electrical system needs...
  10. Roadrunner

    Where the sbc 350 builds

    I've been thinking about 411 swapping the black box and trying tunerpro and ls droid on a vortec. I dont have a truck to put it in at the moment but might be getting closer to one. As far as builds go I've got a few going. Today I finished a motor with a l31 short block and tbi top for a k1500...
  11. Roadrunner

    "ODB"

    I ended up lapping what I could with the valves and putting the heads back together. Now I have a complete engine ready to get stuck in the truck tomorrow. I will be searching for some different heads a bit later on for sure but this should get me a runner at least for the time being.
  12. Roadrunner

    "ODB"

    I've been slowly chipping away at getting this truck as a runner again. Parts came in so work has moved along again. In the parts order was a full gasket set and some new inner door handles. Mostly though it's been a matter of cleaning parts up and getting them ready to be freshened up. I got...
  13. Roadrunner

    "ODB"

    So I slipped up and bought another clapped out chevy on an impulse. This one being a 92 k1500 long bed that I just couldn't pass up for the price. It has 350k miles on the clock and doors, but looks like it was taken care of most of its life. Sadly this one isn't really my flavor and it's...
  14. Roadrunner

    Jayne the shop truck

    Did a little work on the truck today. First I sorted out why radio no longer works. It turns out I need some new speakers. I'm not sure what I'm going to do as far as that goes and getting replacements. Recently I got another k1500 that needs a motor. While yanking the motor out I saw that it...
  15. Roadrunner

    Inexpensive tool boxes?

    Find a couple of cheap old dressers for clothes. Usually you can get nice solid wood ones for free or very cheap. That frees up cash to spend on more tools and parts.
Top