R
ranchman
Latest activity Postings About
-
-
Rranchman reacted to Keeper's post in the thread 1996 K2500 Sub L29 454 Hesitation off idle with
Like.
One of mine has been doing that for a long time with a stock cam/intake (336k). Falls flat on it's face for a full second. It's worse in... -
RThis info was provided by the Dok, and needs to be put on here Converters are the "black holes" and "voodoo" of cars and trucks...
-
Rranchman reacted to SAATR's post in the thread How to: factory auxiliary trans cooler upgrade with Like.
As many of you know, the number one killer of automatic transmissions is heat. As temperatures rise, ATF loses its ability to...
-
RWritten up by Kawamatt2 Ok guys, heres my little write-up for replacing front hubs/unit bearings and calipers, rotors, pads, and soft...
-
RNice write up, will def use this as a reference in the future.
-
RI sent my stock cam to Delta Camshaft in Tacoma, Wa. They ground the stock one to a stock/tow type profile for $140 shipped and it was...
-
Rranchman replied to the thread The Official Vortec 454 Info thread.Same here yes please
-
RPlease please please I'll pay for a copy!
-
RThat's correct, but this correction only occurs while the system is operating in Closed Loop operation. (O2 A/F feedback loop mode) In...
-
Rranchman reacted to el torro's post in the thread 96-99 CPI Truck throttle body INLET gasket with Like.
I didn’t think this would get as much interest as it is. Thanks guys. I’m thinking about pricing them at $5 for two plus shipping. So...
-
Rranchman reacted to L31MaxExpress's post in the thread 96-99 CPI Truck throttle body INLET gasket with Like.
Also meant to throw out there, who cares what color it is printed out of as long as it corrects the un-metered air leak and holds up for...
-
Rranchman reacted to TKerr's post in the thread Want to build a 496 Stroker, looking for guidance with Like.
FYI..I have spent the last year researching this topic for my build. First to get 600ft lbs of torque you are going need to be in the...
-
Rranchman reacted to Motrhedx81's post in the thread Redneck refresh 2000 K3500 CCLB 7.4/454 with Like.
I ran into something interesting when installing the distributor. The GM cam I chose said it needed a specific distributor gear...
-
Rranchman reacted to Motrhedx81's post in the thread Redneck refresh 2000 K3500 CCLB 7.4/454 with Like.
My dad is a 60s/70s kid so of course I had to go with classic chevy orange. Looks kinda purty if I do say so myself
-
Rranchman reacted to Motrhedx81's post in the thread Redneck refresh 2000 K3500 CCLB 7.4/454 with Like.
More to follow...
-
-
Loading…
-
Loading…
