Members

Misterman

I'm Awesome From California

Joined: Dec 28, 2024

Last seen: Today at 5:44 PM

Latest activity Postings About

- Misterman replied to the thread Double check, triple check.
  
  So the joint was contaminated with.....something. I cleaned it up with brake cleaner and a blow tip and a clean old cotton shirt. I...
  
  Today at 5:40 PM
- Misterman replied to the thread "New" Motor Tapping.
  
  I agree. Sounds like a lifter isnt pumped up. If it was internal spinning it would be a faster tapping. That sounds like a lifter.
  
  Yesterday at 3:31 PM
- Misterman reacted to Voyhager3's post in the thread 1998 K2500 HD 6.5 "Smallest Red", From Scrap to Scavenger with Like.
  
  Well, I guess this thing is mine now. Might as well document this mess. Truck- Some context, its a '98 extended cab, long bed, with...
  
  Yesterday at 3:21 PM
- Misterman reacted to Mrmoose's post in the thread 4L80E replacement pan recommendations with Like.
  
  Looking for recommendations for a replacement pan. Should I just go with a stock replacement or does anyone have an recommendations on...
  
  Yesterday at 5:43 AM
- Misterman reacted to Blake88's post in the thread Crank No Start with Like.
  
  1988 C1500 5.0 V8, still learning, can anyone help decipher my test results? I’ve got a no start, no spark, no fuel and no prime. •...
  
  Yesterday at 5:42 AM
- Misterman replied to the thread Installing a GMRS/CB/HAM in a 95+ Overhead Console + Blanks.
  
  Wow very clean! Excellent job thanks for sharing!!!
  
  Yesterday at 5:40 AM
- Misterman reacted to cjpett's post in the thread Installing a GMRS/CB/HAM in a 95+ Overhead Console + Blanks with Wow.
  
  I finally wrapped up installing my GMRS radio in Walter. I wanted it in the overhead console. So I put it there. If you want to put...
  
  Yesterday at 5:40 AM
- Misterman reacted to NickTransmissions's post in the thread 97 3500 2WD 4L80e extension housing assembly worries with Like.
  
  If the o-ring is black and appx 1.5" in dia, it's for a yoke that takes an o-ring. Dont touch the rear case lube seal for the ext...
  
  Yesterday at 2:17 AM
- Misterman reacted to rebelyell's post in the thread Messed up real bad?? with Like.
  
  Ain't no mind-readers here. YES, Drain ALL of Anything that comes out of oil pan drain plug. YES, new O&F
  
  Saturday at 3:43 PM
- Misterman replied to the thread Gaskets/seals.
  
  Wow thats interesting i never would've guessed that thanks!
  
  Saturday at 3:34 PM
- Misterman reacted to PAIRA90S's post in the thread Gaskets/seals with Like.
  
  When I changed my pitman arm it seemed to take almost as long to get the arm off the center link as the whole rest of the job. Part of...
  
  Saturday at 3:33 PM
- Misterman replied to the thread front brake upgrade for 1997 k3500.
  
  Tons of good info, short story: rode with my manager in a dodge van "2500" roll my eyes.... no trailer brakes, in the rain, over speed...
  
  Saturday at 3:33 AM
- Misterman reacted to Gibson's post in the thread front brake upgrade for 1997 k3500 with Love.
  
  IIRC, with the 350 the max tow rating was ~7,500. With the 454 the max was ~10,000. I don't know if those ratings were with 4.10 gears...
  
  Saturday at 3:29 AM
- Misterman reacted to wilburou812's post in the thread front brake upgrade for 1997 k3500 with Like.
  
  thanks guys, I thought i mentioned both truck was in top working order and the trailer had proper braking on it. bad example on my part...
  
  Saturday at 3:29 AM
- Misterman replied to the thread Alignment help.
  
  Do you have the alignment print out? Is it going to different shops or same one every time? Jack up one side of the truck and...
  
  Saturday at 3:17 AM
Show older items
Loading…
Loading…