Recent content by Mike

  1. Mike

    Random pics

    13 CTS-V upgraded cam/springs, over boost crank and blower pulleys, headers and exhaust, injectors, intake
  2. Mike

    12200411 PCM swap for 1996 to 2000 GMT400 trucks

    Check out this book which covers everything you need to know to do this swap and more, definitely a must have if you are interested. How to Use and Upgrade to GM Gen III LS-Series Powertrain Control Systems by Mike Noonan Link: http://amzn.com/161325055X
  3. Mike

    12200411 PCM swap for 1996 to 2000 GMT400 trucks

    Hi Oldguy, A mail order tune would just get the thing to idle and move if you were lucky. A dyno tune would get everything sorted in a day or so. A proper 2 way tune like we do would do the same as a trip to the dyno (if you install a wideband) but usually takes a few sessions back and forth as...
  4. Mike

    1999 LQ4 6.0 / whipple / FLT / yank / etc "Ricer" build thread

    Looking for extra strength out of my front end as well as getting a kick into doing so by having the thermo module stop working I picked up the 4x4 Posi-Lok kit from Summit. I noticed there was no writeup or real discussion about it here so I tried it and am glad I did. Its just simple, it...
  5. Mike

    1999 LQ4 6.0 / whipple / FLT / yank / etc "Ricer" build thread

    How to build a LS performance platform and swap it into anything, as demonstrated by MJE Version 1 This thread will cover every aspect of a thorough build and will hopefully answer a lot of the frequent questions I get and be a single resource to those interested in LS performance or swaps...
  6. Mike

    1999 LQ4 6.0 / whipple / FLT / yank / etc "Ricer" build thread

    Ok so I know I barely ever post anything anymore and there's a host of reasons but this is my attempt at redemption. Besides it is better when you have more than one thing to say at a time. Let's see, the way I remember it, we left off after I fixed the ricer enough to limp around with the...
  7. Mike

    Northeast Members

    Bumping to the top, any winter builds going down?
  8. Mike

    4x4 Posi-Lok Cable Activated Front Differential Install

    Yes you can engage while moving just make sure the cable engages fully. Just replaces the front axle thermal unit so it's useful for all 4x4 trucks.
  9. Mike

    4x4 Posi-Lok Cable Activated Front Differential Install

    Looking for extra strength out of my front end as well as getting a kick into doing so by having the thermo module stop working I picked up the 4x4 Posi-Lok kit from Summit. I noticed there was no writeup or real discussion about it here so I tried it and am glad I did. Its just simple, it...
  10. Mike

    30" LED Bar Install + Pics

    Absolutely no comparison to HIDs in output. Also it has been proven a hundred times over that HIDs in a halogen housing is a bad combo.
  11. Mike

    M & R Light Bar Install Write Up

    Check out our thread here: http://www.gmt400.com/forum/showthread.php?20604-30-quot-LED-Bar-Install-Pics
  12. Mike

    30" LED Bar Install + Pics

    Just wrapped up the install of the 30" LED light bar we got from M & R Automotive - http://www.mandronline.com/ - they are also vendors on this forum. The stock lights on these trucks are not very good and my cheap ebay ones aren't any better. This upgrade makes a GMT400 as bright or brighter...
  13. Mike

    How to LS Swap a GMT400 (or any other vehicle)

    My OS outputs via serial, for reference what pin are you using as output to the dash? EFILive has access to the fuel sender tables. Are you running the Vortec OS? Mine is a 2002 OS for a LQ4 6.0 4x4 truck (12212156) which is one of the few compatible with the COS5.
  14. Mike

    LS Swapping and Performance FAQ

    Check out my thread here with a ton of info: http://www.gmt400.com/forum/showthread.php?19942-How-to-LS-Swap-a-GMT400-(or-any-other-vehicle)
  15. Mike

    about the LS swap

    http://www.gmt400.com/forum/showthread.php?19942-How-to-LS-Swap-a-GMT400-(or-any-other-vehicle)&goto=newpost
See more

Latest posts

Members online

... and 6 more.
Total: 1,233 (members: 56, guests: 1,177)

Forum statistics

Threads
64,260
Messages
1,389,952
Members
51,254
Latest member
joef3

Share this page

Top