Recent content by Micah Wells

  1. M

    Needing some paint advice

    I just have a small pancake style compressor.
  2. M

    Needing some paint advice

    That could be an option. I don't have an air compressor the size it would take. What size did you use?
  3. M

    Needing some paint advice

    I have the ubiquitous white peeling paint. It's got to the point where I need to do something. I've got several surface rust spots on the roof, hood, and bed rails. As well as peeling paint down the side of the drivers door and a couple of other places. I can't see paying $5000-$6000 paint job...
  4. M

    Another peeling paint question

    Thanks @Hipster, that makes sense.
  5. M

    Another peeling paint question

    I have a couple of these spots in various places(fender, door) on my truck. What's the best way to deal with these spots? My truck needs a respray, so starting to work on some of the prep work. Any paint prep(for respray) tips would be appreciated as well. TIA - Micah
  6. M

    Brake Line clips(Frame)

    1994 Chevrolet K1500 Ext Cab
  7. M

    Brake Line clips(Frame)

    Does anyone know where you can get the plastic clips that run along the frame that hold the brake and fuel lines for a 1994 Chevrolet K1500 Ext Cab?
  8. M

    Por-15 on frame question

    @Drunkcanuk Just now getting the time to work on it, but here are a few pictures. This was taken right after the second coat. Heed the warnings about this stuff sticking to everything. Got some on my hands, looks like I will have por15 on my hands for a few weeks. Otherwise, went on well. I used...
  9. M

    Por-15 on frame question

    I’m cleaning up the inside of my frame. Does this look descaled enough to put por-15 on. I still need to clean and prep.
  10. M

    Pre-Bent Brake Lines

    Kind of off topic a bit. The line that runs to the rear along the driver side frame, does the gas tank need to come down to replace?
  11. M

    Pre-Bent Brake Lines

    I'm not sure. Was trying to avoid buying a bunch of tools that I might not need again and hopefully saving some time with not having to bend.
  12. M

    Pre-Bent Brake Lines

    I know LMC makes a kit, but is there an alternative? LMC's kit is a bit pricey.
  13. M

    Por15 on surface rust on roof

    @kennythewelder, thanks for the response. You wouldn't recommend using any of the rust to primer converters?
  14. M

    Por15 on surface rust on roof

    I've got some surface rust in a couple of areas on the cab roof. Could I use a por15 type product? If not, what do y'all recommend outside of a respray?
  15. M

    Sagging arm rest

    Is there a way to fix this sagging arm rest? - Micah
Top