Thanks, all the debate I keep having with myself is to remove the trim strip, on one hand I like it but it holds dirt like the fender chrome which in my opinion leads to rust? Anyone have opinions on this.
I agree too many kids can't even start a lawnmower, I would have loved working with my son on a truck but I was gone too much and focused on soccer and little leagues when I was home. Now we get together and work on his house and I get to catch up on what I missed. My wife (his Ma) did a great...
Well I finally did it, new wheels for my pampered ride. Couldn't beat $200 off a set of 4 Michelin tires and the wife surprised me finding a nice set of rims so she (truck) Went from 265 75 16 to 265 70 17. I like the new look.
For the alignment also be advised they sell different degrees of cam washers so after you clean up the knock out area if they can't get the right degree with stock hardware they should suggest new hardware if their a decent shop. I bought the tool did my own knock outs myself to save money and...
Yup that's the one, all of them are on the first page, I couldn't help myself once I looked lol I almost bought a Fall Guy truck in package for $10 but waited.
Forgot to mention that the misfire was due to two plugs being bad and I had replaced them less than a month before so checking the parts you replaced is not out of question.
I understand he doesn't have a Vortec engine, was only statiing that not having it pop a code don't mean much. It is possible for the Vortec to be out of time per say, GM says to get it as close to 0 degrees as possible but if one re installs the distributor one tooth off it will run but not at...
Personally I really dig the black on white look so Black center caps and tool box, Black nerf bars, Spray in bed liner line Line-x That's what I have in my 98 bed and absolutely love it. nothing slips on the liner even when I want it to, lol
I have been looking for a truck like yours forever...
My 98 Tahoe had a similar issue no codes but would stumble under acceleration, Took it to the shop it was out of time once the timing was fixed it popped a misfire code on 2 cylinders, replaced all the plugs and also had them clean the fuel system top end, it runs great now and I know...
A way to test to see if its your switch, turn on the headlights so you can see them from inside the truck and pull the tilt lever and move the wheel up and down if your lights flash on doing this its the switch. the wires in the switch are banjo tight and over time fray and break then lights go...