Recent content by LovesDunes

  1. LovesDunes

    97 Tahoe with 4/6 Belltech Drop

    After replacing everything up front, especially the upper and lower a-arm bushings, the Tahoe sat too high in the front. The bushings most have been worn out for a while. Not sure what happened to the brightness on this picture. Oh well. The spacing from the top edge of the wheels to the...
  2. LovesDunes

    97 Tahoe with 4/6 Belltech Drop

    Had some more excitement the other day. Was cruising through Yuma Arizona on the way to Mesa and decided to stop off at Taco Bell to grab a burrito. As I am handing the kid at the window $4.00 all of the sudden the drivers side front drops and there it a huge bang. Lower ball joint came...
  3. LovesDunes

    97 Tahoe with 4/6 Belltech Drop

    So I was making my way back from a week at the office and in between Maricopa and Gila Bend I just happen to find a huge pot hole. Messed up the wheel to the point it would no longer hold air. The outside lip was not that bad. I could see the shop off in the distance in Gila Bend where I...
  4. LovesDunes

    97 Tahoe with 4/6 Belltech Drop

    We are down South by San Diego. We live East of San Diego up in the hills in a tiny town called Descanso. I still don't have the A/C working. Or the gas gauge, or the tach. LOL I tried to get help locally, but all of them want to replace the harness because they think I did something...
  5. LovesDunes

    97 Tahoe with 4/6 Belltech Drop

    Dude that tank looks great! Great job with that paint work. The Tahoe was painted around 1996. They did a really good job. The flames are under many coats of clear. They continue through the door jams onto the rear quarter. The interior is tweed and the flames continue in there too. It's...
  6. LovesDunes

    Limp mode, PRNDL fuse hot, no power to 4L60E

    Did you ever figure out what the fix is?
  7. LovesDunes

    97 Tahoe with 4/6 Belltech Drop

    Nothing note worthy. I will say the 5.3 swap is one of the greatest things I have done for the Tahoe. The 5.7 was such a dinosaur
  8. LovesDunes

    A/C Help After 5.3 Swap

    Haven't changed anything other than the compressor, but when doing the wiring, their are wires coming from the new ECU. I'm going to mess with it today. I need to reacquaint myself with the project after sitting for so long. I know nothing happens under the hood. I can't remember what is...
  9. LovesDunes

    Tried So Many Things But No A/C in 1999 GMC Sierra K1500 Classic

    Thanks
  10. LovesDunes

    Tried So Many Things But No A/C in 1999 GMC Sierra K1500 Classic

    "I used the diagram in the 1999 service manual for C/K trucks." Can you post that diagram?
  11. LovesDunes

    A/C Help After 5.3 Swap

    Well, my A/C still does not work. Honestly I just haven't had a lot of time to mess with it. Health bull$h!t. Now that I am feeling better I really want to get the A/C working so we can enjoy this thing again. Is there anyone here that has gone through this after doing an LS swap? I'm handy...
  12. LovesDunes

    Rocker panel color add please

    Better to find out now with Photochop.
  13. LovesDunes

    Rocker panel color add please

  14. LovesDunes

    Two unknown PCM wires

    Are you sure those wires are from the black plug? All of my purple/white wires were from the blue plug. Either the O2 sensors or the VSS. The black/white wires I had were in the red, white and black plugs. I have some other complete harness's I can check tomorrow to see if they offer any...
  15. LovesDunes

    Going to 5/7

    Not sure if this helps, but my Tahoe has parts from a Beltech 4/6 drop. I have Belltech spindles. Wheels are 20x8 with 5" of backspacing. Front tires are 275-40 R20 Toyo Proxes. The wildcard on my setup is the front springs. They are from a 69 big block Camaro with some coils cut off. I...
See more

Latest posts

Staff online

Members online

Total: 864 (members: 15, guests: 849)

Forum statistics

Threads
64,254
Messages
1,389,895
Members
51,247
Latest member
Quasar

Share this page

Top