Recent content by Lewis1129

  1. Lewis1129

    2/4 to a 4/6 Question

    I currently have a 2/4 belltech kit on my truck. I do not have the original spring hangers that I took off to put on the drop hangers. Is there anyway to get the 4/6 and use the drop hangers. I really hate to spend $100+ each on new stock hangers. I didn’t pay that much for the whole 2/4 kit...
  2. Lewis1129

    NV3500 to 700r4 swap.

    I’ve got a turbo 400 that I could put in it, but with the 4.10 gear I already have I don’t want that. When I say street strip I mean 90% street, 10% for run Footbrake class at the local drag strip.
  3. Lewis1129

    NV3500 to 700r4 swap.

    But if I don’t care about the lock up then I wouldn’t have to do anything with it. Honestly the tbi is temporary. Once I get the transmission swapped it will become more of a street/strip type of build.
  4. Lewis1129

    NV3500 to 700r4 swap.

    I have a 91 scsb that currently is 350/nv3500. What all would I need to do this swap. I’m trying to just find a donor truck to do it that way. Would the computer need to be messed with?
  5. Lewis1129

    TBI Cam Question

    So I’m thinking about putting a cam in my 91 TBI 350. It’s my dd but my daily commute is only about 5 min. My question is, has anyone had experience with putting a cam in these trucks without a custom chip? If so which cam worked for you and did it make a difference. The truck has a good flowing...
  6. Lewis1129

    LC9 91 5speed swap

    The truck is a 91 rcsb with 350/nv3500. I have a tb to pan LC9, but unfortunately don’t have harness or pcm for it. What type of pcm do I need to be looking for. I’m deleting the DOD and VVT. So I don’t have to worry about those in the pcm. But it’s a gen 4 and is a 58x. What will I use from my...
  7. Lewis1129

    Carb Size

    I’m doing a carb swap on my 91 tbi 350. I’m getting the parts together and have a question about carb size. I would like to put a 650 on it, but have access to a 3310 750 vacuum secondary Holley and also a 450 cam Holley. The truck is a daily and is stock for the moment. It will later get a mild...
  8. Lewis1129

    TBI fuel pump question

    I do believe my fuel in my 1991 has gone out. I still have some things to check to make sure, but that is where the facts are pointing. Here is my question. I plan down the road to do a 5.3 swap. With that being said. Could I swap in a vortec pump or a walbro 255 and it run ok with the stock TBI...
  9. Lewis1129

    Nv3500 to 4l60e conversion?

    I have a 91 2wd scsb. It was born with a 5spd which I prefer, but my wife doesn't like driving it and wants me to put an auto in it. I would like to go 4l60e, but know that the 700r4 would be a lot simpler. I plan to do an ls swap in this truck as soon as it's financially feasible. What would be...
  10. Lewis1129

    LS Swap Trans Question

    Im planning and piecing together a swap for my 91. I plan to get a 99-02 engine so that I can just use cable throttle and less electronics to deal with. The truck is currently a 5 spd but I plan to go automatic with the swap. Would a 4l60e that matches the engine as far as year be better or a...
  11. Lewis1129

    5.7 TBI 5-speed stumbles when I let off gas

    I had a similar problem with my 91 5.7 5 speed. It would do it real bad in parking lots and drive thrus and places like that. All I did was removed the vacuum tube running to the egr valve and capped it at the source. Solved it completely.
  12. Lewis1129

    88-93 Painted GMC Grille

    That is the type of grille I have. My first plan was to switch it out for a 94-98 grill. But those are much harder to find around here than I thought. So I was just trying to think of something to do with my grille I have.
  13. Lewis1129

    88-93 Painted GMC Grille

    Does anybody have any pictures of the 88-93 gmc grilles that are painted. It's the composite headlight grille. I'm debating painting the chrome body color, but haven't been able to find any examples of it.
  14. Lewis1129

    350 tbi stumble. HELP

    Yeah I meant egr. I think my phone corrected it.
  15. Lewis1129

    350 tbi stumble. HELP

    Well I fixed the problem. Started trouble shooting and took the vacuum line off the edge valve and it totally fixed it. So for right now just going to leave it unplugged. I capped it at the source and have no CEL so I'm just gonna drive it.
See more

Latest posts

Members online

Total: 864 (members: 23, guests: 841)

Forum statistics

Threads
64,314
Messages
1,391,186
Members
51,399
Latest member
Parking lot mechanic

Share this page

Top