Another question... I purchased my kit second hand and it didn't come with the parts for the drive shaft carrier bearing. Will this be critical for the drive shaft?
Thanks for your help. I understand what you have going on with the shocks and mounts. I already have the belltech street performance shock for the rear. I would still like to do the upper mounts at least to get the shock back to the correct angle but I don't know if that will throw the shock...
Finally go around to getting my belltech drop spindles on. I was wondering does any grinding have to be done to the steering stops on the lca. Looks to me like I can get a lot
more turning radius out of it if I remove the stop. The belltech spindle has a bit more material there than the stock...
Question about the upper mounts. Did you use the drop shocks with them or are those stock height shocks? Im 4" in the rear on an ecsb and thinking about the upper mounts . Just trying to get some info. I saw in an earlier post you said you use the upper mounts and extenders. I just thought that...
I know this reply is probably to late to be of any help but just saw you post today for the first time but anyways.... Thats exactly what I did. Notched the bed mount after that the hangers lined up perfectly.
Ok after hours of searching on belltechs website I think I may have found my problem. I hope anyway. My question is, is the any difference in the leaf hangers from standard cab and extended cab? Someone please say it is...
Funny thing is matched them up with the oe hangers(passengers side) and the holes line up. Its just the bed mount thats keeping them from lining up on the frame. I talked to belltech today. The sent me some measurements to check if the hanger was machined rite. Will have to do this in the...
Hi guys have a stupid question. Trying to install the belltech leaf hangers and they dont quite line up with the holes that the rivets came from. The bed mount is in the way. Should I notch the bed mount? Im I doing something wrong? Looks like it will be that way on both sides. Ohh yea... Im...