Recent content by Garrett Fulton

  1. G

    GMT400 power sliding rear window.

    Was wondering if anyone here has found a source for a power sliding rear window for GMT400 trucks? Mine is a '93 C2500 and due to some right shoulder problems, I'd like to install one of these. Thanks for any info.
  2. G

    Visitor

    That's what happened to me. At 18. Went in the Marines and they took full advantage of it.
  3. G

    Power steering pump: flush or replace?

    I had 3 parts store PS pumps that were junk. 2 from Autozone, one from NAPA. All the same problem. The check valve at the back of the pump inside the line fitting was machined wrong and jammed open. This was a '93 C2500 6.5 diesel. The front seal was leaking on the original pump and I...
  4. G

    93 C2500 shifting hard

    My '93 C2500 started the hard shifting and it was a bad ignition switch. Bad switch had worn contacts and the green crud in it.
  5. G

    LMC part quality

    I bought the plastic black cover for the rear bumper on my '93 from LMC. It was, far and away, the worst made piece of crap I have ever seen. Just total junk. Not saying all their stuff is like that, but that was my experience.
  6. G

    New Dash Now Available 88-94

    The clicking is coming from the recirculation door actuator. In my opinion, impossible to replace without pulling the dash out. The other two actuators have position feedback to the HVAC controller and run to their commanded position and stop. The recirc. door actuator runs either full open...
  7. G

    Suspension overhaul

    If you want to install polyurethane suspension bushings, I'd stay away from PST (Performance Suspension Technology). I replaced all of my susp. bushing with poly bushings on my '93 C2500 from them. Truck rode like I was going down the road on the rims after. Replaced the cab to frame poly...
  8. G

    A/C Help...

    "Also, I don't think it's relevant but worth mentioning I'm fairly certain the heater core is beginning to fail due to the gurgling sounds coming from the glovebox area, and the truck unexplainably overheating a few months back after a short road trip." (From original posters first entry.) Just...
  9. G

    Door Panels

    Outstanding, Evil Uncle. Been looking for those for a while too. Thanks.
  10. G

    Cab mounts

    In my opinion, anyone that uses polyurethane suspension bushings will wish they hadn't. I replaced every susp. bushing in my ''93 C2500 with poly bushings from PST, Performance Suspension Technology. Rode afterwards like I was going down the road on my rims. Took the poly cab mounts out and...
  11. G

    Removing blend door actuator on 1994 k1500 sbrc

    The reason that's the actuator that always fails is that it has no position feedback. The other two have a position sensor internally and send it back to the HVAC control head. They stop at the commanded position. The recirc. door actuator runs to either open or closed and power is held to...
  12. G

    Tailgate Band

    https://www.lmctruck.com/1988-98-chevy-gmc/bed-tailgate/cd-1988-98-tailgate-band The normal disclaimer for LMC Truck. I bought rear bumper black OEM style plastic protectors a few years ago that were so badly chinesed that I had to remanufacture them. And the price on this tailgate band is...
  13. G

    Repair Manuals

    You'll be glad you went with the factory manuals. I've had an alldatadiy account for years and use it to help my sons with their trucks, but have the factory manual for my '93. Alldatadiy misses quite a bit of information the factory manual has, and some of the wiring diagrams and...
  14. G

    cruise module

    I was able to find a replacement CC module for my '93 6.5 C2500, if this is the type of module you have. I think it was a Dorman, but can't find the paperwork on it now. My bad module would not maintain an acceleration for more than a couple seconds and after taking the cover off of it, found...
  15. G

    Linex Bedliner

    LineX is a great company. They sprayed in the bedliner on my '93 C2500 19 yrs. ago. A piece of it chipped off about 2 in. diameter when I was loading a way to heavy generator into the bed. Took it to the closest LineX place and they completely removed all the old bedliner and sprayed in a new...
Top