Recent content by fuschnicker

  1. fuschnicker

    Intake Gasket Replacement

  2. fuschnicker

    Truck does not start.

    I want to ask a question... My Hoe starts, but: sometimes you need to turn the key for minutes. Means: turn the key, lights in the dash, voltage etc is ok. But no fire. Sometimes it takes 1 or 2 times, sometimes it takes minutes till the engine starts. What could this be?
  3. fuschnicker

    Knocking noise

    I start thinking if I will build a stroker... That sounds not that bad and could be done by myself...
  4. fuschnicker

    Knocking noise

    I stripped the block today. All main bearing look ok I would say. Piston does not look that good. Zylinder all look the same, except no 1 with the "problem"...
  5. fuschnicker

    Knocking noise

    Haha. That's not an option for me here jn Germany. I am running on LPG because of the costs. And to get a cheap one here is not that easy
  6. fuschnicker

    Knocking noise

    Look what I see:
  7. fuschnicker

    Knocking noise

    Them it makes more sense to take a complete rebuild kit. Besides that, are there any big things to know about if I take out the engine? That's my first time doing that
  8. fuschnicker

    Knocking noise

    So I decided to pull the engine out and replace the parts. What do you suggest? All pistons new? Or just piston and rod for cylinder 1
  9. fuschnicker

    Knocking noise

    I guess that could be Zylinder 1, where the parts fall in...
  10. fuschnicker

    Knocking noise

    There is just a picture of all. Not in correct order Engine has 200.000mls
  11. fuschnicker

    Knocking noise

    Yes. Same noise before and after I replaced the bearings. Not better. I just thought it is gone away for second but then I heard it again
  12. fuschnicker

    Knocking noise

    No, no measurements... just replaced bearings with original size Just took the torque as advised.
  13. fuschnicker

    Knocking noise

    As I mentioned, the rod bearings are replaced. So I guess that the only way to find that out is a engine removal... Since this noise comes from under the engine, I thought is could be possible that it is the flexplate... but that was only a hope ;-)
  14. fuschnicker

    Knocking noise

    Hi all, Long story, short version... I had a part fallen into Zylinder 1. After that, a noise starts coming up. I replaced intake manifold gaskets and also head gaskets. Also new connection rod bearings. After all the noise is still there. From above the engine I can hear almost nothing. When...
  15. fuschnicker

    New lifter?

    Since I have a 98 Tahoe I assume that these are roller lifters. I already took them out and I will inspect them later one. Sounds logic that I have to replace the cam, in case they are worn out. The car has 199.000 and I am curious too see the inside of the heads, which I will take off today...
See more

Latest posts

Members online

... and 3 more.
Total: 1,850 (members: 53, guests: 1,797)

Forum statistics

Threads
64,332
Messages
1,391,457
Members
51,433
Latest member
HiItsRem

Share this page

Top