Recent content by FrankenTruck13

  1. FrankenTruck13

    New here, 1992 GMC C1500

    Starting to prep the truck to be repainted white. Painted the grill recently, along with new lenses.
  2. FrankenTruck13

    1994 HVAC conttrol head face plate

    Do you have a picture of what you are needing?
  3. FrankenTruck13

    XJ Steering Shaft Upgrade (88-94 Trucks) 95+instructions on page 31

    I tackled this same job yesterday, purchased that same shaft from ebay too. After torching it forever I realized there is no internal plastic, it is indeed held on by those indentations. Instead of drilling however, I just beat the shaft out. After getting it out I was able to file down those...
  4. FrankenTruck13

    V6 Motor Mounts?

    I went ahead and tackled the job of replacing the mounts. (Not something I'd want to do again btw) Anywho, for anyone else out there facing this job I will give my input. The driver side was not terribly difficult. I jacked up the motor using a block of wood on the oil pan lip (along the bolts)...
  5. FrankenTruck13

    V6 Motor Mounts?

    Interesting, if I planned on keeping the V6 i'd definitely consider these. Thanks!
  6. FrankenTruck13

    V6 Motor Mounts?

    Anyone have any tips or tricks on replacing the motor mounts in my 92 V6 truck? I am not yet ready for my 305 to go in, so the v6 will be staying for a bit, however the mounts are shot. Just hoping someone may chime in with some advice on how they did it. Thanks
  7. FrankenTruck13

    New here, 1992 GMC C1500

    While working on the truck I have also been freshening up this to replace the V6. It's a 97 Vortec 305. I haven't rebuilt it, as it ran great before being removed from the donor truck. Just replaced gaskets, timing chain, and the oil pump. Plans are to keep it old school with a Rochester carb.
  8. FrankenTruck13

    New here, 1992 GMC C1500

    Thanks, everything I have done to the truck has been over the past year or so, just whenever I had free time. My dad has also been a big help on some things.
  9. FrankenTruck13

    '09 Crown Vic Police Interceptor

    I am a big fan of the Panther platforms myself. I've had 2 Grand Marquis and a Town Car. Parts are cheap and even more plentiful than our trucks. This crown vic looks great!
  10. FrankenTruck13

    New here, 1992 GMC C1500

    I've got a long way to go on this truck. Looking for some wheels and tires now.
  11. FrankenTruck13

    New here, 1992 GMC C1500

    Thank you
  12. FrankenTruck13

    New here, 1992 GMC C1500

    With the exception of surface rust, the frame is great. I believe the rust inside was all due to a leak
  13. FrankenTruck13

    New here, 1992 GMC C1500

    Thank you, honestly I should have looked the truck over a little better before buying it. Dealing with rust really sucks, but I think I have it under control now..
  14. FrankenTruck13

    New here, 1992 GMC C1500

    Thanks
  15. FrankenTruck13

    New from Florida

    Me too!
See more

Latest posts

Members online

... and 23 more.
Total: 2,067 (members: 73, guests: 1,994)

Forum statistics

Threads
64,326
Messages
1,391,405
Members
51,430
Latest member
Noel11

Share this page

Top