Recent content by DL0336
-
D
Blend door assembly broken (not the actuator)
Hello Richard, Thank you very much for the thorough information on the removal. I purchased some JB Welder Plastic Epoxy prior earlier and as able to get the broken bonded back in place. It is still setting up, after it sets up, I will apply another thin coat and allow it to set. I am hopeful...- DL0336
- Post #4
- Forum: OEM and Custom Interiors
-
D
Blend door assembly broken (not the actuator)
Good day all, My grandson's 1994 1500 had a defective passenger side blend door actuator. It was making the ratcheting sound but was not moving. Once I removed the screws and then started to take it off, a piece of plastic fell to the floor. After looking around it was discovered that the blend...- DL0336
- Thread
- Replies: 3
- Forum: OEM and Custom Interiors
-
D
Slip or no slip, what's normal?
Happy to report that the issue has been resolved. The shop gave me a quote of $688 to replace the yoke and u-joints. They cleaned the yoke up and found that it has a groove worn in it. This was causing the issue. I did not have the shop do the work but remembered some local yards and headed...- DL0336
- Post #27
- Forum: Transmissions
-
D
Slip or no slip, what's normal?
After looking at several new yokes, it seems the missing spline is not missing but designed as such. Thanks L31Max. I ordered and received a new yoke from RockAuto, it slips in and out like butter. A side by side comparison of the 2 yokes, the original is about a 1/4' to 3/8' longer than the...- DL0336
- Post #9
- Forum: Transmissions
-
D
Slip or no slip, what's normal?
Thank you all for the feedback. Truck is stock height. Output shaft splines look good. Will be getting the slip yoke replaced, it has an entire spline missing.- DL0336
- Post #6
- Forum: Transmissions
-
D
Slip or no slip, what's normal?
Good day all, I bought my grandson a 1993 GMC Sierra 1500, 5.7, std cab, 4L60e, long bed. The truck has not reverse. Driving it home, it loss 1st gear. I attempted to push the driveshaft forward out of the rear diff saddle with a large pry bar-*, it would not budge. I searched google and saw...- DL0336
- Thread
- Replies: 26
- Forum: Transmissions
Members online
- Hipster
- 94chevc1500
- OffroadZ71
- OBS 2DoorTahoe
- Frank Enstein
- 90k15
- deward
- Road Trip
- Roggeriv
- Jksconny
- green96machine
- South VA
- vince72
- jimflint
- AMFJ
- yevgenievich
- L31MaxExpress
- Schurkey
- slow_c1500
- Scooterwrench
- shaneroze
- Anchor
- Thatrebelboy48
- JJMT
- Polo1986
- GMT400NUT
- Berdo97
- Das Hatt
- Jeff 95 tbi
- Chevyman1969
- Jerryred94silvy
- mxmxmc3000
- MalcolmEatmanGoode
- 1TexasDude
- Jwill000
- D13g0
- Suavecito619
- RSTHEREALONE832
- Jblackwell205
- 2DoeProjectHoe
- RichLo
- Claymore877
- Obs9850739
- Motrhedx81
- 77Eltigre
- tommy loyal
- termite
- BeXtreme
- Burnsj79
- Joe Dirte