DavidAllenCoe
Latest activity Postings About
-
-
DavidAllenCoe reacted to Schurkey's post in the thread 1992 K1500 GMC Sierra 5.7l Steering knuckle removal without touching the torsion bars or keys? with
Like.
There's no reason to remove the lower control arm, the sway bar, the sway-bar links, or the shock absorber to remove the steering... -
DavidAllenCoe replied to the thread 1992 K1500 GMC Sierra 5.7l Steering knuckle removal without touching the torsion bars or keys?.Like I had stated in the OP, I have all new parts for the front suspension besides the lower control arms.
-
DavidAllenCoe replied to the thread 1992 K1500 GMC Sierra 5.7l Steering knuckle removal without touching the torsion bars or keys?.I’m trying to avoid removing lower control arm and messing with the torsion bars and keys. Wheel hub is stuck to knuckle, my sway bar...
-
DavidAllenCoe reacted to evilunclegrimace's post in the thread 1992 K1500 GMC Sierra 5.7l Steering knuckle removal without touching the torsion bars or keys? with Like.
Put a jack stand under the control arm and set the truck down on it.
-
DavidAllenCoe replied to the thread 1992 K1500 GMC Sierra 5.7l Steering knuckle removal without touching the torsion bars or keys?.That’s what I had done, but now my sway bar links don’t line up through the lower control arm. I went to dismount the sway bar and I...
-
DavidAllenCoe posted the thread 1992 K1500 GMC Sierra 5.7l Steering knuckle removal without touching the torsion bars or keys? in Stock Suspension + Bolt On Kits.So I am replacing my front suspension, besides my lower control arms and bushings (Tie rods, ball joints, sway bar links, upper control...
-
DavidAllenCoe reacted to wb292's post in the thread 88-98 4x4 lower control arm compatibility with Like.
I haven't been on here for a min or two. I gave a update on my post about LCAs.
-
DavidAllenCoe reacted to BBslider001's post in the thread 88-98 4x4 lower control arm compatibility with Like.
I fail to see where there was an expectation or force applied LOL. Now, there was a statement made, but neither of the previous were...
-
DavidAllenCoe reacted to Nad_Yvalhosert's post in the thread 88-98 4x4 lower control arm compatibility with Like.
It'd be nice if O.P. did that of his own accord, but being expected or forced to do so? Not in this lifetime. However, asking...
-
DavidAllenCoe reacted to BBslider001's post in the thread 88-98 4x4 lower control arm compatibility with Like.
Or he could just update the thread he posted in.
-
I can't speak on the astro lower arms as I've never tried to use them. If none of your local boneyards have any in good shape I'd...
-
I've got a pair here just for that reason. 70 bones pulled for me from a yard that happened to have a few trucks when I was working oot...
-
These trucks are 30 years old. If one part's wore out, it's all wore out. If it hasn't been rebuilt, plan on a full rebuild.
-
Hey everyone, Ive been looking into rebuilding the front end suspension of my 94 k1500. When going over speed bumps and such its a...
-
DavidAllenCoe reacted to Erik the Awful's post in the thread Changing tie rods without jacking up truck? with Like.
Get a Harbor Freight floor jack. They're cheap and they work. Don't ever trust any jack to hold up a vehicle while you're under it. You...
-
-
Loading…
-
Loading…
