Recent content by Dale Greb

  1. D

    1992 K1500 crate motor

    Ok sorry for "wasting" everyones time lol
  2. D

    1992 K1500 crate motor

    Thanks for the replies everyone. Heres the story. Bought a 92 k1500 4x4 automatic, did a crate motor and 5 speed swap. motor wasn't properly covered and it was stored outdoors for about a month. Go to put the motor in the truck, took the oil drain plug out and out comes tons of water. Open the...
  3. D

    1992 K1500 crate motor

    Sorry they're blurry...slap it in or no way? Brand new crate motor
  4. D

    Parts for an AC system?

    Can anyone tell me what this ball is behind the battery? 1 hose goes to the intake manifold and one goes to this little device against the firewall. And then 1 hose from that device is cutoff somewhere. The truck has an aftermarket ac installed already but I'm not sure if this has anything to do...
  5. D

    88GMCtruck's NV4500 Swap

    Awesome write up man, I'm putting in a getrag290 in place of the 700r4 i took out along with a crate motor swap. Few questions though, where did you get the wires from to hook up to the clutch start safety switch? is it the same as the neutral safety switch? will my truck not start up if i dont...
  6. D

    Radio options!

    Hey everyone, I got a 92 Chevy k1500, doing a crate motor swap and a 5 speed swap...not an easy job but definitely gonna be worth it! So I want to put in a touch screen radio. I have been looking at double dins ND single dins and found a kit that allows you to put a double din radio where the...
  7. D

    input shft replacement

    i have a 92 k1500 that I am doing a 5 speed swap in...it is going from 700r4 to nv3500. I need a 32 spline input shaft instead of the 27 spline that's inside of the transfer case now. when I go to order a input shaft, it gives me the option of a 24mm bearing or an 18mm bearing. how am I to be...
  8. D

    700r4 to nv3500

    So if the 700r4 has 27 spline then the t case in it now must have 27 obviously...is it hard to change input shafts from 27 to 32?
  9. D

    700r4 to nv3500

    Im seeing that the transfer case I have now is an np241 and I need an np205 for the nv3500....I'm not sure of anything, I was looking for someone who might have done the same swap as me
  10. D

    700r4 to nv3500

    I'm doing a 5 speed swap in my 92 k1500 which has a 700r4 in it now...Ive heard that because the two transmissions are different sizes, the tcase from the automatic won't work and I have to find one from a donor truck..is this true? Any info is helpful...thank you
  11. D

    700r4 to nv3500

    I'm doing a 5 speed swap in my 92 k1500 which has a 700r4 in it now...Ive heard that because the two transmissions are different sizes, the tcase from the automatic won't work and I have to find one from a donor truck..is this true? Any info is helpful...thank you
  12. D

    Auto to Manual swap

    Okay great..I ended up finding the same info after further study..it's just good to have assurance. Thank you
  13. D

    Auto to Manual swap

    Do the brake and clutch come as a pair like trucks before that year? I got everything to swap it but I only got the clutch pedal, no brake pedal...I figured that meant the original brake pedal could be cut an used. Trucks like that are rare to find in my area so getting a donor truck isn't...
  14. D

    Auto to Manual swap

    I have a 92 K1500 with a 350 in it and a 700r4 trans. im looking to swap to an nv3500. I have the 5 speed transmission but I need the clutch and brake pedal assembly...does anyone know where I can find some? and I heard I need a new ecm for it, is this also true? thanks for any info
See more

Latest posts

Members online

Total: 690 (members: 14, guests: 676)

Forum statistics

Threads
64,299
Messages
1,390,809
Members
51,358
Latest member
1993 Suburban c1500

Share this page

Top